KJ Auktion online event # 195: Marsh Wind Technology, Part 2, closing 25. June 2014 from 1 PM CEST
Auction 195
Location:
Building B and C, Mørupvej 27, 7400 Herning, Denmark
By instruction of the administrator KJ Auktion will be selling equipment from the estate Marsh Wind Technology. This is sale 2 of 8 including machine tools and equipment from the assembly and sheet metal shop.
The sale is subject to private treaty (sale by negotiation). If agreed the sold lots will be withdrawn from the auction and previous bids on sold lots will be cancelled.
 |
 |
 |
 |
 |
 |
Viewing:
Viewing on Friday, 20. June 2014 from 10 AM to 4 PM CEST
Pickup:
Thursday 26. June and Friday 27. June from 9 AM to 4 PM CEST
Screw Compressor, ALUP SCK 76-8. 9.2 m3/min. 55 kW. 8 Bar + dryer, ALUP + oil and water separator, ALUP + pressure tank, 1000 liters, 9 bar
Number: 0001
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Vacuum Hilti VC 20LU (without rod and nozzle)
Number: 0002
Address: Bygning A-B, Mørupvej 27, 7400 Herning
2 x material trolley coupled together. Length approx. 9 meters
Number: 0003
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Workbench with metal plate, approx. 2000 x 1000 mm + vice + tool panel with light + content, including bolts, nuts, washers, threaded rods, etc. + 2 trestels + cupboards
Number: 0004
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Work Bench, approx. 2000 x 800 mm + vice + drawer + tool panel with light + content, including bolts, nuts, washers, blind plugs, etc.
Number: 0005
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Terminal unit with 2 x flat screens and barcode scanner
Number: 0006
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Writing desk on wheels with cable roller + first aid kit
Number: 0007
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Trolley with plastic box + planning board
Number: 0008
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, ESAB LAG 400 + wire feed box, ESAB A10-MEC 33 + welding cables. Mounted in a frame on wheels
Number: 0009
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed welding cable box + + torch. Mounted in a frame on wheels
Number: 0010
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Work Bench, approx. 2500 x 800 mm + vice + drawer + tool panel with light + content, including screws, bolts, tape, etc..
Number: 0011
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, Electrex MIG 405 + wire feed box, AF 75.3, on wheels + welding cable welding + handle + manometer. Mounted in a frame on wheels
Number: 0012
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier Migatronic Dynamig 505 + wire feed box, Migatronic KT140 + welding cable welding + handle + manometer. Mounted in a frame on wheels
Number: 0013
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Work Bench, approx. 2500 x 800 mm + vice + drawer + tool panel with light + content, including fencin chains, buckle straps, unused
Number: 0014
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, Electrex MIG 405 + wire feed box, AF 75.3, on wheels + welding cable welding + handle + manometer. Mounted in a frame on wheels
Number: 0015
Address: Bygning A-B, Mørupvej 27, 7400 Herning
1 span steel rack with content + and brush
Number: 0016
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Removable gantry crane, Kone Cranes, 1000 kg. Electric hoist. 2 speed up / down. Connecting bar with brackets for topics
Number: 0017
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Work Bench, approx. 2000 x 800 mm + tray + content
Number: 0018
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Work Bench, approx. 2000 x 800 mm + vice + bench grinder Creusen
Number: 0019
Address: Bygning A-B, Mørupvej 27, 7400 Herning
2 x trolley for Euro Pallets + pallet rack
Number: 0021
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Pallet with miscellaneous, including clamps, sledge hammers, electric cables, barrier chains, etc.
Number: 0022
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Bolt Cabinet with Content + material trolley with tool panel with content including nuts and bolts + wooden box with rope
Number: 0023
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Tool Trolley with rack and content, including Cramps
Number: 0024
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Hydraulic scissor lift table, foot operated. Platform for Euro Pallet
Number: 0026
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Petrol Generator Honda Motor + work lights, etc. + boxes of silo mark Kjellberg, Finsterwalde
Number: 0027
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Acu-Impact Wrench, Makita + charger + cordless impact wrench, Hitachi battery and charger + air impact wrench, IR
Number: 0028
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Cordless drill, Makita battery and charger + Cordless drill, Worx, with battery and charger + power die grinder, Metabo + cordless impact wrench (without battery and charger)
Number: 0029
Address: Bygning A-B, Mørupvej 27, 7400 Herning
4 x cordless impact wrenches, Hitachi with 2 batteries and 2 chargers
Number: 0030
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Pallet with assorted welding electrodes and more
Number: 0031
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Pallet with 5 material stands with legs in pallet
Number: 0032
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Pallet with 5 material stands with legs in pallet
Number: 0033
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Various cordless tools and chargers. Condition unknown
Number: 0035
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Various cordless impact wrenches, DeWalt, with 1 battery and 1 charger
Number: 0036
Address: Bygning A-B, Mørupvej 27, 7400 Herning
3 x cordless impact wrenches, Hitachi, with 3 batteries and one charger
Number: 0037
Address: Bygning A-B, Mørupvej 27, 7400 Herning
4 x cordless impact wrenches, Hitachi with 4 batteries and one charger
Number: 0038
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Pallet including 8 x metal saw blades, including Wespa marked Bitec M42, l: 3800 mm, W: 27 mm, D 0.9 mm Z/25, 4 mm: 4/6 0 degrees + metal saw blades, Klingspor
Number: 0039
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Power Reciprocating Saw, Milwaukee + powr hammer drill, Metabo
Number: 0040
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Cordless hydraulic hose clamps, elpress PV 1300, with battery and charger + 2 suitcases
Number: 0041
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Bolt-welding machine, Nelson Intra 2100, with welding cable and two torchs
Number: 0042
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit (panels missing) + welding cable + torch. Mounted in a frame on wheels
Number: 0043
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, ESAB LTG 250 + welding cables + manometer. Mounted in a frame on wheels
Number: 0046
Address: Bygning A-B, Mørupvej 27, 7400 Herning
About 75 Euro pallets + various pallet collars + various wooden boards
Number: 0047
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding extraction, Geovent with motor and hose + workbench
Number: 0048
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Box with metal drill + workbench on wheels with tool panel + power cable
Number: 0050
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Drill press, Arboga A3803 ELM. Spindle rpm: 75-3010. Oil cooler. Year 2007. + Vise
Number: 0051
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Overhead Crane (20), 3200 kg, electric hoist below the gantry. Hook, Demag 3.2 t 2 Speed up / down. Span approx. 14 meters
Number: 0052
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Overhead Crane (20), 3200 kg, electric hoist below the gantry. Area, Demag 3.2 t 2 Speed up / down. Span approx. 14 meters
Number: 0053
Address: Bygning A-B, Mørupvej 27, 7400 Herning
4 x pallets with pallet collars + plate + rubber mats
Number: 0055
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Euro Pallet Rack + with pallet collars and plates
Number: 0056
Address: Bygning A-B, Mørupvej 27, 7400 Herning
2 x foil wrappers + 3 boxes of 6 rolls of foil for foil wrapper
Number: 0059
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Cordless-Impact Wrench, Makita, with battery and charger + Cordless drill, Bosch with 2 batteries and charger + box with metal drill
Number: 0060
Address: Bygning A-B, Mørupvej 27, 7400 Herning
4 x Euro Pallets and pallet collars + wood panel + rubber mats
Number: 0061
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Pallet with various lifting chains + 3 x clamp for sheet metal, 1000 kg, 0-19 mm + lever hoist, 0.8 ton
Number: 0062
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Lever hoist, 1.6 ton + clamp for sheet metal, 1 ton, 0-19 mm
Number: 0063
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Lever hoist + clamp for sheet metal, 1000 kg, 0-19 mm
Number: 0064
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Lever hoist, 1.6 ton + clamp for sheet metal, 1000 kg, 0-25 mm
Number: 0065
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Lever hoist, 1.6 ton + clamp for sheet metal, 1000 kg, 0-19 mm + magnet lifting beam, 600 kg
Number: 0066
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Pallet with lifting chains, shackles and lifting straps
Number: 0067
Address: Bygning A-B, Mørupvej 27, 7400 Herning
4 x pallet pallet load beams + wooden boards + rubber mats
Number: 0068
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, ESAB LAN 400 + wire feed box, ESAB A10 Mek 44 + welding cable + torch + gauge + cooling unit. Mounted in a frame on wheels
Number: 0069
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, ESAB LAW 510W + wire feed box, ESAB MEK 20 + welding cable welding + torch + manometer. Mounted in a frame on wheels
Number: 0070
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, ESAB LAH 500 + wire feed box, ESAB A-10 MEK 44 + swing arm + cooling unit
Number: 0071
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, ESAB LAN 400 + wire feed unit + wlding cable + torch + cooling unit + swing arm. Mounted in a frame on wheels
Number: 0072
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, ESAB LAW 510W + wire feed box, ESAB MEK 4 S (minus cover) + welding cable + torch. Mounted in a frame on wheels
Number: 0073
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Gantry crane, 3200 kg, electric hoist below the gantry. Area, Demag 3.2 t 2 Speed up / down. Span approx. 14 meters
Number: 0074
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Gantry crane, 3200 kg, electric hoist, Demag, during gantry. Area, Demag 3.2 t 2 speed up / down, forward / backward. Span approx. 14 meters
Number: 0075
Address: Bygning A-B, Mørupvej 27, 7400 Herning
2 span pallet rack, 8 load beams, approx. 2.8 meters. 3 uprights, approx. height of 2 meters, width approx. 60 cm.
Number: 0076
Address: Bygning A-B, Mørupvej 27, 7400 Herning
2 span pallet rack, 8 load beams, length approx. 1,9 meters plus 3 uprights, height approx. 2.5 m
Number: 0077
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Height truck with a platform for euro pallets, foot operated
Number: 0078
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Overhead Crane (4245) labelled 500 kg. Electric hoist, Demag, under the cross beam, dismantled. Span approx. 6 meters
Number: 0080
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Extension Forks, length approx. 2400mm, width approx. 180 mm
Number: 0081
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Extension Forks, length approx. 2400mm, width approx. 180 mm
Number: 0082
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Electric truck, 3 wheel, Linde E14, 1400 kg. Hydraulic side shift + charger. Clear-view mast
Number: 0084
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Gantry crane, 2000 kg. Electric hoist below gantry, Demag. 2 speed up / down. Span approx. 14 meters
Number: 0085
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Pallet with various lifting chains + 4 x sheet metal clamps, 1000 kg, approx. 0-19 mm
Number: 0087
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Clamp for sheet metal, 1000 kg, 0-19 mm + magnet lifting beam 300 kg +lever hoist, 1500 kg + spindle sheet metal clamp, 1500 kg.
Number: 0088
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Clamp for sheet metal, 1000 kg, 0-19 mm + magnet lifting beam + lever hoist + spindle sheet metal clamp, 1500 kg
Number: 0089
Address: Bygning A-B, Mørupvej 27, 7400 Herning
3 x spindle sheet metal clamp, 0.5 ton + clamp for sheet metal, 1000 kg + 2 spindle sheet metal clamp, 1500 kg
Number: 0090
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Clamp for sheet metal, 1000 kg + lever hoist, 1.6 ton + clamp for sheet metal, 0.5 ton, etc.
Number: 0091
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Clamp for sheet metal, 1000 kg + clamp for sheet metal 500 kg + lever hoist, 1.6 ton
Number: 0092
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Lever hoist, 0.8 ton + lever hoist, 0.5 ton + chain hoist 250 kg
Number: 0093
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding machine, Philips type 3566 / 00. 350 amp
Number: 0094
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, Compact 400 Professional + welding cable + torch. Mounted in a frame on wheels
Number: 0095
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, ESAB LAN 400 + wire feed box, ESAB MEH 44 + welding cable welding + handle + cooling unit. Mounted in a frame on wheels
Number: 0096
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Bolt-welding machine, Nelson Intra 2100, with welding cable and two torches
Number: 0097
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Welding rectifier, ESAB LTG 250 + welding cable welding + handle + cooling unit. Mounted in a frame on wheels
Number: 0098
Address: Bygning A-B, Mørupvej 27, 7400 Herning
Gantry crane, 5,000 kg. Double gantry. Hoist on gantry. Demag hoist, 5 ton. Area, Demag, 5 ton. 2 speed up / down. Span approx. 14 meters
Number: 0100
Address: Bygning A-B, Mørupvej 27, 7400 Herning