Location:
Danmarksvej 8, DK-4681 Herfølge
Responsible:
Mette Olsen
[email protected] Tlf: 20 30 20 47
Viewing:
Friday, 16-09-2016 from 10:00 to 15:00 o'clock
Pickup:
Monday, 26 and Tuesday, 27-09-2016 from at 09:00 to 16:00 o´clock
Traverskran with weight. Stahl electric hoist max 500 kg span approximately 5.5 meters approximately 8 meter rails and 4 columns
Number: 0201
Address: Danmarksvej 8, 4681 Herfølge
Angle Grinder + aku skkruemaskine (defective battery) + jack + circular saw
Number: 0206
Address: Danmarksvej 8, 4681 Herfølge
Pallet with air cylinder + air hose + screw range
Number: 0208
Address: Danmarksvej 8, 4681 Herfølge
Palle Long live + bolts + tank for emptying the solar thermal
Number: 0209
Address: Danmarksvej 8, 4681 Herfølge
40 foot container ALU furnished with power, very good condition
Number: 0227
Address: Danmarksvej 8, 4681 Herfølge
party run tiles 60 x 80 cm approximately 53 paragraph entire
Number: 0232
Address: Danmarksvej 8, 4681 Herfølge
Glasfibertag between two containers, height 3.2 meters in all 4 sections width of about 6 meters
Number: 0234
Address: Danmarksvej 8, 4681 Herfølge
40 foot container Alu with sliding door on one side, remove the interior is slightly included but otherwise good condition
Number: 0241
Address: Danmarksvej 8, 4681 Herfølge
1 piece indblæsningssaggregat model Geovent VEKA INT 4000-54 L1 EKO, machines are electric drives and was produced by Salda in Italy in October 2014, installed November 2014 - and has been in use for about 700 hours in the period up to April 2015.
Number: 0243
Address: Kystvejen 24, 2770 Kastrup. Kontaktperson: Michael Normand Pedersen Tlf. Nr. +45 7239 9192
1 piece indblæsningssaggregat model Geovent VEKA INT 4000-54 L1 EKO, machines are electric drives and was produced by Salda in Italy in October 2014, installed November 2014 - and has been in use for about 700 hours in the period up to April 2015.
Number: 0244
Address: Kystvejen 24, 2770 Kastrup. Kontaktperson: Michael Normand Pedersen Tlf. Nr. +45 7239 9192
1 piece indblæsningssaggregat model Geovent VEKA INT 4000-54 L1 EKO, machines are electric drives and was produced by Salda in Italy in October 2014, installed November 2014 - and has been in use for about 700 hours in the period up to April 2015.
Number: 0245
Address: Kystvejen 24, 2770 Kastrup. Kontaktperson: Michael Normand Pedersen Tlf. Nr. +45 7239 9192
1 piece indblæsningssaggregat model Geovent VEKA INT 4000-54 L1 EKO, machines are electric drives and was produced by Salda in Italy in October 2014, installed November 2014 - and has been in use for about 700 hours in the period up to April 2015.
Number: 0246
Address: Kystvejen 24, 2770 Kastrup. Kontaktperson: Michael Normand Pedersen Tlf. Nr. +45 7239 9192