Liquidation Auction: Smeden (machine tools and more), closing 28. August 2012 at 1 PM CET
Auction 72

Starts closing on Tuesday 28 August 13:00

Location:

Description:

This auction has machines from liquidated estates without reserves. Machines from other sellers may have reserves.

AUTOBID

If you have been here before you will probably notice a lot of changes in design and function. The most important change is that now all bids are autobids. This is explained in the menu item and news.

The catalogue has more than 100 lots including:
Machine Tools: Belt sander, Arboga 75x2000 with exhaust and extra belts * (2) pillar vacuum lifts, AL-VAC, 75 kg. * Migatronic CO2 welding machine, MIG 385 + extra welding torches and hoses * Pillar column drill, Strands S25 with machine vice, year 2008 * Pillar column drill, PowerCraft ZJQ5116 * Band Saw, Carif 260 BSA, Year 2008 * Bolt Welder, Köko Elotop 1702 * Welding machine, Esab Co2, Aristo 400 LUC with Esab A10 – MED-44 wire feed unit and straigh line torch * Welding Machine, Migratronic LDH 160 H
Factory Equipment: (2) trailers, Variant, T500, L350 + Brenderup Bravo 4262T * Lockers * Alu-stairs * Welding surfaces * Vice benches * Work tables * Compressor, ABAC LT 200 * Cement mixers * Beam vibrator * Various racks * Trolleys * Tool Cabinets * Electric hoists * Electric Stackers
Tools: Lots of hand tools, power tools, air tools
Office and warehouse: Pallet racks, plumber fittings and equipment * Abrasives * Screws and Bolts * Whiteboards * Multifunction Office Machines *
Miscellaneous: LG Aircondition, AntiBacteria, 2400Btuh, 2600W, 12.5 Amp * Leak finder, UV Floodlight H135 * Vibration Tester, Brüel & Kjær, type 2513 * Scaffolding * Iron bars, tubes and panels. * (3) Crew Pavillions

Viewing:

Viewing on 24. August 2012 from 10 AM to 4 PM

Pickup:

Colledtion on 29. + 30. August from 8 AM to 4 PM

Gallery List

50 pr. page
100 pr. page
200 pr. page

Print Refresh

1-100 101-160

Variant trailer T: 500 kg L: 350 kg. B: 120 cm L: 250 cm H: 49 cm

Number: 0001

Address: Møllegårdsvej 3, 4270 Høng

Manufacturer: Variant

Liquidation Auction: Smeden (machine tools and more), closing 28. August 2012 at 1 PM CET Auction 72

Variant trailer T: 500 kg L: 350 kg. B: 120 cm L: 250 cm H: 49 cm

Brenderup Alu trailer model Bravo 4262T. T: 750 kg L:480 kg Salgsnr. H2C0EDDK1. L:260 cm B: 145 cm.

Solar Panel, H: 198 cm, width: 98 cm

Whirlpool Refrigerator / Freezer

Lockers, 2 x 6 rooms

2 aluminum stepladders 3 + 4 steps

1 section strong steel shelving 8 beams

Welding Surface. L: 300 cm W: 150 cm H: 90 cm 10 mm panel

Work Bench with vice

Work table with shelf + rack for work table

Workshop table L: 296 cm W: 70 cm H: 87 cm + stainless steel panel

ABAC compressor LT 200th HP: 5.5 Model: B 59008-200 CT 5.5 to 400 year 2000

Vertical Mixer approx. 400 liters

Vibrating Beam Dynapac ER 620. length: 4.25 meters

Arboga Belt Sander 75 x 2000 with a cyclone and extra belts

Column Vacuum Lift AL-VAC 75 kg

Column Vacuum Lift AL-VAC 75 kg

Flat iron bending machine EDA on pedestal

lot suction tubes

lot pipe insulation

lot drainage hoses

Hose rolling carriage

lot floor heating tubes

Welding curtain 3 pcs. on stand

Cage with various PVC Fittings

6 Supporting Columns

Pallet of various Plumbing supplies. Radiator, pump, mixer, etc.

Pallet of various abrasive material

Pallet lifting straps

Pallet of various abrasive material

Pallet with screws, bolts, various end caps etc.

Pallet of various tools, cable, air grinder, etc.

Assortment boxes with contents.

2 pcs. Cordless Screwdrivers Bosch + Milwaukee

3 power tools. Bosch Angle Grinder + Metabo Drill + AEG drill

Pallet with steel steps (18)

Pallet of various abrasive material

Pallet of various tools + toolbox with content

Soroto 100 L-30 mortar mixer

3 porcelain sinks

Pallet with clamps + 2 pcs. Socket Sets

Assortment rack with content + tool panel

Nilfisk Aero 20 Inox

Tig operating welding torches + helmets

Trolley with various consumables + assortment boxes with content

Migatronic Co2 MIG Welder 385 + extra welding torches and hoses

Pillar Drilling Machine, Strands S25 with machine vice min: 105 max 2500 rpm. Year 2008

Pillar Drill, Power Craft type: ZJQ 5116. 170 to 3080 rpm

Bandsaw, CARIF 260 BSA, year 2008, with roller conveyors

KÖCO bolt welder Elotop 1702

Pallet of various abrasive material

Co2 welder Esab Aristo 400 LUC 400 with Esab A10-MED-44 wire feed unit + straight line cutter

Pallet of various abrasive material

3 trestles + lazy jack

Pallet of various abrasive material

Pallet with fresh air equipment

2 whiteboards

2 steel racks

Firefighters Cabinets 3 rooms with keys

Migatronic welder LDH 160 H incl. Helmet

Tool cabinet with glass doors incl. key

Whiteboard 200 x 120 + board with sliding doors

(3) Power Tools Bosch GWS19-230 angle grinder + Makita + Bosch Grinder

Cordless binding machine for floor heating tubes 4-PRO + box with binding wire

LG Air conditioning, AntiBacteria. 24000 Btuh, 2600 W 12.5 Amp

3 pallet boxes with doors

Tool cabinet with key + content

Tool cabinet without key

2 shredders

Xerox work center M 20 I. Print, scan, copy

Brother MFC 7055 printer, scanner and copier

Leak Finder with UV light. UV Flood Light H135

Vibration Tester Brüel & Kjær type: 2513

3 pallet boxes with doors

7 steel racks, depth 30 cm

lot power rails for halogen spotlights + box with magnetic holders + converters + power + trays for electric tubes

Sideboard with top shelf

3 steel racks, depth 60 cm

Rolling scaffolding

Liquidation Auction: Smeden (machine tools and more), closing 28. August 2012 at 1 PM CET
Auction 72