Liquidation auction of Marsh Wind Technology, part 7
Auktion 228

Name: Auktion 228 Liquidation auction of Marsh Wind Technology, part 7
Start: 2014-11-19T13:00:00+01:00
End: 2014-11-19T13:00:00+01:00
Location: Mørupvej 27, 7400 Herning, Denmark

Zeigen terms and conditions

Fängt an zu schließen Wednesday 19 November 13:00

Adresse:
Mørupvej 27, 7400 Herning, Denmark

Beschreibung:

By instruction of the administrator of the estate, Marsh Wind Technology, Herning, Denmark, KJ Auktion will be disposing all equipment by online auction subject to prior sale by Private Treaty. This means that if we get an acceptable offer for a lot, then we will sell prior to the auction ending date and the lot will be withdrawn from the auction catalogue. If you wish to submit your Private Treaty offer please contact Jens Lynderup, tel.: +45 53 55 98 53, [email protected]

425 lots featuring:

Machines:

· Welding tower with Esab powder welding machine

· Many weldingmachines (ESAB og Migatronic)

. Powder welding machine, Esab 800

· Plasmascutter, Messer Griesheim, Cortina, 12,5 meters

. Cutting machine, Corta, with optical read of drawings

. Lots of workshop equipment and accessories.

Roller Beds:

· Sets of powered rolle bed for welding, Vego, capacity of 100 tonnes, wheels Ø700 mm

· Sets of powered rolle bed for welding, Hendrickks, year 2009, capacity of 100 tonnes, wheels Ø700 mm

· Powered roller bed, Pemamek OY, type 30 tons.

Cranes and lifting equipment:

.         Overhead traversal cranes from 1 tons to 7,5 tons
.         Lifting beams for pipe materials, many powerful J-lifting yokes 40 tons
.        Many chains, hooks etc.

Handtools, spareparts etc.:

· Lots of new handtools and electrical handtools

· Workware cloths, boots etc.

. Welding cables Esab, Migatronic and others

. Spareparts for Esab, Speedglas and much more

Besichtigung:

Viewing on Friday 14-11-2014 from 9.00 to 15.00

Pickup:

Collection on 20 November from 8 AM to 4 PM. + 21. November 2014 from 8 AM to 3 PM CEST

Galerie Liste

50 pr. Seite
100 pr. Seite
200 pr. Seite

Drucken Aktualisieren

1-100 101-200 201-300 301-400 401-427

Welder, Migatronic KMX550, S / N 02060139, with wire feeder, water cooling, Power cable, welding torch and welding handle

Nummer: 0001

Adresse: Mørupvej 27, 7400 Herning, hal L syd

Liquidation auction of Marsh Wind Technology, part 7 Auktion 228

Welder, Migatronic KMX550, S / N 02060139, with wire feeder, water cooling, Power cable, welding torch and welding handle

Set welding roller beds on rail wheels, Hendricks, 100 tons, complete with control cabinet, cable and remote control, year 2009, 2 x 6 wheel diameter approximately 700 mm

Set of powered roller beds with a total of 8 rubber wheels, diameter approximately 400 mm, adjustable workpiece diameter

3 boxes of welding wire, each 18 kg, Esab OK Aristorod 12.63, ø 1.0 mm

4 boxes of welding wire, each 18 kg. Esab OK Aristorod 12.63, ø 1.0 mm

Tool panel, 3 pcs Tool Cabinets with 1 door and drawer, including content and box of filter materials

Welder Esab LAN 400, S / N 338-515-655 with wire feeder, welding hose, handle, power cable, cooling unit

Chair, stool on wheels, Spotlight on adjustable stand

Vacuum Barrel and exhaust arm with long hose

Roller bed, Pema, unpowered, on rail wheels, 4 bed wheels Ø ca 550 mm, Type 80 TNS, S / N F4711, max capacity 40 tonnes. Workpiece diameter: 500-7800 mm, year 10/1996, weight 2.810 kg, adjusting with threaded spindles, rubber on one wheel is damaged

Lifting hook J-hook with shackle and eye

Aluminium ladder with 8 steps and trestle ladder with 2 x 3 steps

Truck in aluminum for half pallets or similar Hovmand, 250 kg

Truck in aluminum for half pallets or similar Hovmand, 250 kg

Floor Sweeper Kaercher KM 70 / 20C

Coffee maker, Zanussi Domino, coffee, espresso, cappuccino

Dishwasher La CIMBALI type KSD, stainless steel

Water dispenser, Co.Fr.I.Me.Ll., COF 224

Pallet Truck, NH 2000 kg, long model, 2000 mm length

Pallet Truck, NH 2000 kg, long model, 2000 mm length

Pressure Washer, KEW Hobby 80-1

Step ladder made of aluminum, small floodlight on tripod towing dolly, about 78x50 cm

Towing dolly, about 68x50 cm, Towing dolly approximately 190x60 cm

3 x van wheels with 6 bolt holes, winter tires 235x65 R16C, 8PR 115 / 113R, 1 x light commercial vehicle wheels with 6 bolt holes, tires 195/75 R16C

4 pcs van wheels with 6 bolt holes, tires 225/65 R16C, 1 x light commercial vehicle wheels with 5 bolt holes, tires 225/65 R16C, 2 van wheels with 6 bolt holes, tires 235/65 R16C

2 x tires Vanhawk, 225/70 R15C, 3 x tires 225/70 R15C 112 / 110S, 1 tires 225/65 R16C 121 / 119N

Welding rectifier, Esab LAW 500, with power cable, nulkabel, missing welding hose and handle

2 pcs heavy bottle / hand trucks, and small ditto

Welding rectifier, Esab THF 400, with power cable, missing welding hose and handle

Welding rectifier, Esab LAN 400, S / N 036-126-559 with wire feeder, welding hose, handle, power cable

Lifting beams, combination, 40 tons

Welding rectifier, Esab LTG 400, with zero cable, power cable, welding hose with water cooling and welding torch

Welding rectifier, Electrex MIG 405, marked OK, with water cooling, wire feeder, welding hose and torch

1 set of roller beds on rail wheels, Hendricks 100 tons, year 2009, with 12 rubber wheels, diameter approximately 700 mm, rubber coating in good condition, control box, power cable, remote control and long cable

2 x stairs with handrails and wheels, approximately 60x50 cm

2 x small stepladders and stool on wheels

Brackets Liftra, type LT 839.1, year 2010

Welding rectifier, Migatronic KDO 500, S / N 92061080, with wire feeder, water cooling, welding cables welding torch power cable, zero cable

Welding rectifier, Migatronic 440 with wire feeder, water cooling, welding cable, welding torch, power cable and additional welding cable and welding torch

Brackets Liftra, type LT 839.1, year 2010

Mounting carriage to the inside of the pipe, Liftra model LT 827-1, class of 2010, galvanized and with 2 arm hoists

Pallet with heavy duty pneumatic hoses, etc.

J-hook lifting beam, Marsh Wind, 70 tons, weight 740 kg, year 2011, with shackle

J-hook, lifting beam, Marsh Wind, 70 tons, weight 740 kg, year 2011

Powder Welding Unit, Esab LAE 800, S / N 508-634-710, on platform, with the welding tractor, welding hose, power cable and more. OBS: control box is missing

4 pcs fiber base plates approximately 50x50x6 cm, with handles

4 pcs fiber base plates approximately 50x50x6 cm, with handles

6 pcs fiber base plates approximately 50x50x6 cm, with handles

6 pcs fiber base plates approximately 50x50x6 cm, with handles

2-wheel wheelbarrow, 2 x tool boxes with contents and welding helmet etc.

2 x cages with bars containing tubes and more,

Pallet truck NH 2500

Extension cables and other cables on the wall

Cutting tools for tube holes, Koike Sanso Kogyo, KHC-600D

2 x aluminum sheets about 3000x1500x6 mm, and three aluminum pipes approximately 60x60x3 mm

Lot aluminum panels, leveling rails, aluminium ladders, cable trays etc.

Lot cable trays, corners, Canalis rails etc.

Scissor Lift Table Sax Lift, 3000 kg, approximately 130x80 cm, with hydraulic pump, complete, leaking of lifting cylinders

Pedestal Grinders Kreusen

Workshop table on wheels with drawer and two glasses for lathes and cylinder trolley and pallet truck

12 pcs timber, approximately 200x200 mm, length about 4.9 meters

30 pcs EUR pallets

30 pcs EUR pallets, file photo

30 pcs EUR pallets, file photo

30 pcs EUR pallets, file photo

30 pcs EUR pallets, file photo

30 pcs EUR pallets, file photo

30 pcs EUR pallets, file photo

30 pcs EUR pallets, file photo

30 pcs EUR pallets, file photo

30 pcs EUR pallets, file photo

30 pcs EUR pallets, file photo

31 units of EUR pallets, file photo

Blue hoses and plastic pipes

Aluminium Landing / ladder

Truck Box, slightly bent

Frame with approximately 60 pieces pallet collars

5 pcs cages with bars containing, 3 pcs pallets and 18 pcs pallet collars containing cardboard etc.

Ca 36 pcs EUR pallets

Liquidation auction of Marsh Wind Technology, part 7
Auktion 228