CWA Rørindustri ApS in liquidation, online auction on 11. December 2012 at 1 PM CEST
Auktion 87

Fängt an zu schließen Tuesday 11 December 13:00

Adresse:

Beschreibung:

KJ Auktion will be disposing the equipment from the estate of CWA Rørindustri in liquidation.

If you have machine tools for disposal for this event, pls. contact Jens Lynderup, tel.: +45 53559853, email: [email protected]

Lot Catalogue of app. 250 lots. Featured lots:

Machine Tools: Guillotine, Darley GS 3106 CL, year 2004. Max capacity: 6mm. Working length: 3050mm. Power: 16.5 kW. Machine weight: 7300 kg. Motorized back gauge. Control Darley * Segment press brake, Darley FL-CE 110 31/25., Control: DELEM DA21. Lots of equipment * Segment Press Brake, Donewell, type 25-1600.inkl. equipment * Hydraulic press with corner equipment * Belt Sanders * Fasti circle cutting machine, 502/07/2 7952007 * Simasv AV 220-6PA. Cutting and punching of sheet up to 3.5 mm. Model AV-PA, type 226 * Motorized roller Nossebro Mekaniska Verkstad, type RM 20/15, year 2,000. Capacity: 2020 mm x 1.5 mm * Many Eccentric Presses * 3 pipe bending machines, RMV and others, with lots of accessories * Many pillar drills, Strands S68 + GILLARDON GB 40V * Hydraulic presses * Many welding machines, incl. bolt welder and spot welder * Bandsaw, Macc Special 270 * Crosscut Saws * CNC pipe sawing machine with feeder, reamer, etc. * CNC Profile Rolling mill, Tauring with lots of bending tools * Sheet Deburring Machine * ONA Wire Cut EDM Machine

Factory Equipment: Tilt Containers * Lots of pallets * Height Lifters * Forklift, Stocka, 3000 kg. * Pallet Racks * Steel shelving * Sweeper * Strapping and strapping cart, Cyklop * Air Welding Tables * Column Jib Crane, 125 kg. * 2 welding exhaust systems * Screw Compressor, Stenhøj * Reach Truck, 1500 kg.

Tools: lots of hand tools, power tools and air tools.

Office, canteen and locker room

And much much more

Besichtigung:

5. December from 8 AM to 4 PM CEST

Pickup:

12. + 13. +14. December from 8 to 16

Galerie Liste

50 pr. Seite
100 pr. Seite
200 pr. Seite

Drucken Aktualisieren

1-100 101-200 201-249

Guillotine, Darley GS 3106 CL, year 2004. Max capacity: 6mm. Working length: 3050mm. Power: 16.5 kW. Machine weight: 7300 kg. Motorized back gauge. Sheet Catcher. Extra knives and tool. Control: Darley

Nummer: 0001

Adresse: CWA Rørindustri, Bogensevej 9 B, 8940 Randers SV

Hersteller: Darley Herstellungsdatum: 2004 Modell: GS 3106 CL

CWA Rørindustri ApS in liquidation, online auction on 11. December 2012 at 1 PM CEST Auktion 87

Guillotine, Darley GS 3106 CL, year 2004. Max capacity: 6mm. Working length: 3050mm. Power: 16.5 kW. Machine weight: 7300 kg. Motorized back gauge. Sheet Catcher. Extra knives and tool. Control: Darley

Cantilever racking with 8 branches without content

Ladder on wheels, 5 steps. Width: 94 cm. Height approx. 145cm

Cantilever racking with 6 branches without content

5x steel pallet stands

Press Brake, Darley FL-CE 110 31/25. Machine. SN 121577. Year of manufacture 1994. Machine weight: 8700 kg. Press force: 1100 kg. Max. stroke: 150mm. Max speed: 100 m / sec. Stop time: 62 ms. Two-hand 103. Control DELEM DA21 + pressure tool on racking inc

Support

Tilting Container

Pallets and frames

Press Brake, segment. Donewell type 25-1600. SN: 1750091127. Year 1975. Weight: 1900 kg. Machine Height: 2090 mm??. Max. pressure: 18, 64 MPa, 190 bar. Stop time: 80 ms. Engine: 4 hK. Max. stroke: 100mm. Speeds: rapid traverse: 100 mm / sec. Bending: 10 m

Hydraulic press with corner press

Hydraulic fixture, 4 cylinders. Surface approx. 140x110 cm

Belt Sander, Fein, Grit GX 752H / 79,010,200,403. Year of manufacture 2008. Belt width: 75 mm

Fasti circular shear, 502/07/2 7,952,007, type 750 x 2 rolls approx. 120 to 750 mm. Strips approx. 10 to 260 mm. Machine weight approx. 300 kg.

3 section pallet racking, 18 beams, length approx. 273 cm. Max. 1000 kg .. Height approx. 243 cm

2 pallets various

2 pallets various

Notching Machine Simasv AV 220-6PA. Sawing and punching of sheet up to 3.5 mm. Model V-PA type 226th SN: C1525. Work table: 950 x 890 mm. Year 1996. Machine weight: 960 kg. Operation Instruction included. For reference: http://www.youtube.com/watch?v=bR

Pallereol for half pallets, width approx. 275 cm. 8 beam. Max. 1000 kg. Content not included

Assortment boxes on shelves, plastic containing: bolts, screws, blind rivets, etc. Pallet rack not included.

Motorized sheet metal roller Nossebro Mekaniska Verkstad, type RM 20/15, year 2000. Capacity: 2020 mm x 1.5 mm. Machine weight: 590 kg. SN: 20081. Symmetrically placed rolls. The lower rolls are fixed mounted. The upper rolls is adjustable by means of two

Work with content: miscellaneous hand tools, pliers, cutter

2 pallets various

Pallet Lifter, 1000 kg

Low lifter, NP Logitrans, 1000 kg

Pallet Lifter, 1000 kg

Pallet Lifter, 1000 kg

Pallet Lifter, 1000 kg

Low lifter, NP Logitrans, 2500 kg

Low lifter, NP Logitrans, 2500 kg

Low lifter, NP Logitrans, 2500 kg

Pallet rack for half pallets, width approx. 300 cm. 8 beams. Max. 1000 kg. Plate Shelves

Miscellaneous on pallet

Pallet with various pressure gauges, air hose and welding wire: ESAB OK Autorod 316 LSI, 15 kg

Air Blind Rivet Gun, VNG 800 + manual

2 x air grinders

2 x power angle grinders, Ø125: Metabo EWE 9123S-Quick Metabo + + drill, Würth Master BS 10-XE + cutting discs

2-room wardrobe with content

2 grouped workbenches with vice + tool panel with content + content on the table

Eccentric, Smeral Trnava LENR 40A. Machine 1409. Year of Manufacture 1976. Nominal pressure: 40 MP. Max. strokes / min: 110 RAM adjustment: 60mm. Weight: 2370 kg. Corner Tools. Air Hydraulic fixture

Hydraulic presses, Stenhøj hydraulik, type 40458. SN: the 40458th Year of the 1984th Press force: 150 kN, 15 T. Piston speed 20 mm / sec. Working pressure: 30MPA. Weight: 435 kg. + Accessory racks. Rack included

Pillar Drill, Strands S68. SN: 69690. Engine: 0.75 / 0.90 kW. R / M 1400 / 2800. Clamping surface 42x27 cm. Capacity: 16 mm

Pillar Drill, Strands S68. SN:101053. Engine: 0.65 / 0.90 kW. R / M 1400 / 2800. Clamping surface 42x27 cm. Capacity: 16 mm. Year 1995

3 aluminum ladders

Photocopier, Gestetner 27/52t + cabinet

Pallets and pallet collars, etc.

Hydraulic press, HV Engineering

Hydraulic press, Compac 40 tons

Pillar Drill, GILLARDON, type GB 40V. 40 to 1100 r / min. Capacity: max. 40mm. Weight approx. 650 kg.

Low lifter, NH 2500 kg

Steel Shelving with content: Various metal drills, 4.5 - 12 mm + air hoses + 3 bags labeled: Flat Head Round Body Knurled ", 500 pieces, hole 9mm, grip range: 0.5 - 3 mm + 2 boxes plastic tubes

Tube bending machine with Pipe bending equipment

Welding surface,144 x 101 x 1.2 cm + content: socket sets, wrenches, air drills, angle and calipers, pliers, etc.

Pallet with various hand tools, pliers, lifting straps, etc.

Tube bending machine, BMV + various tube bending tools

Tube bending machine, RMV + various tube bending tubes

5 x barrier rails

5 cages

4 sections pallet racks,16 beams, 1000 kg, length: 273 cm, 6 gables, height: 243 cm

Let off for packing materials on wheels, 2 rollers and 2 cutter blades, cutting width approx. 180 cm. 2 rolls of foam

Welding Surface on wheels, 200 x 83.5 x 1 cm + content: hand tools, 2 x Blind Fastener Guns + Makita cordless drill type 8433D + flashlight type ML14 + battery: 3.0 Ah, 14.4 V + charger + chair

Pallet with electrical cables and connectors, 32 A, 5-pole

Work Bench, 190 x 88 cm + content: hand tools, Air Blind Fastener Gun + cordless drill, Metabo 12 V + metal drills, air stapler + 12 boxes staples + table + stool

4 sections steel shelving + steel bookcase with slanted shelves + 2 x filing cabinets, 4 drawers

4 x plastic strap coils for strapping tool + 1 box of corner protectors for straps

Strapping and strapping cart, metal straps, Bandutomat CM, Cyklop + 17 coils metal straps on pallet

Grinding Discs and grinding wheels, 5 kt. Naxos-Union Duroflex roughing disc ø115mm x 6x22, 23 + 10x grinding discs Pferd 80E 115-6 Inox Stainless + Tyrolit steel A30q-BFX, 125x7x22, 23 + approx. 28 x Tyrolit grinding discs A30Qv-BF06 7x6x9, 5 + approx. 1

2 angles, including one mounted in frame + workbench, length 200 cm

Tube bending machine, Curvatubi o.l.m. Model B \ 60D \ PMP. SN: 771424. Lots of bending tool. Instruction Manual + Spare parts catalog, English. Technical data: Inner bend: radius min 35 mm max. 400 '. Bending direction: right. Control range: 6000. Bendi

Contents of pallet racking: welding curtains + 2 x flexible hose, aluminum, Ø120mm x 10 mtr + main hangers, welding glasses + welding helmet + spare parts for welder. Bending tools for tube bender not included

Pallet rack for ½ pallets: 6 beams, length 273 cm, max. 1000 kg, height: 243 cm. Wooden Shelves. Content of pallet rack not included

Wheeled panel stand with 2 wooden worktops, solid, 90 x 90 x 3 cm + 1 worktop,solid, 60 x 60 x 3 cm + wheled panel stand, width approx. 145 cm, 4 columns branches

Floor Sweeper with manual, Lavapavimenti Sweeper 51 ET. Year of manufacture 2007. Charger

4 x welding hoses for TIG welding on table including table

Worktop, solid, 60 x 60 x 3 cm + stand

Worktop, solid, 60 x 60 x 3 cm + stand

Worktop, solid, 60 x 60 x 3 cm + stand

Worktop, solid, 150 x 90 x 3 cm + 2 x stand

Stand with Euro Pallet + content: 10 boxes HEX HD SCREW, High Tensile Grade 8.8. M8x16 + trolley with brooms + buckets

CWA Rørindustri ApS in liquidation, online auction on 11. December 2012 at 1 PM CEST
Auktion 87