OK Lifts in liquidation - Online auction - closing 30. October at 1 PM and 2 PM CEST
Auktion 81

Fängt an zu schließen Tuesday 30 October 13:00

Adresse:

Beschreibung:

KJ Auction has been commissioned by the administrator of OK Lifte A/S in administration to dispose all operating assets by online public auction. The auction closes with 200 lots at. 1 PM and remaining lots at 2 PM CEST

The catalog has approx. 350 lots and closes with 200 lots at a time. Each lot goes into extended time when it is bidded within in the final 10 minutes before the auction closes. This means that the closing time of the lot will be extendeded by additional 10 minutes from the time the bid was submitted. We recommend to click lots to the whatch list and then click the Bid Manager button. Showing only products that are clicked or bidded, so you can more easily manage your bids when the auction closes. If you cannot bid during actual closing time you can still participate as if you were if you have the highest autobid. All bids act as Auto Bid, the system automatically bids on your behalf as long as you have the highest Auto Bid.

Featured lots:

Equipment: 2 x lathe, Triumph 2000 with accessories * Lathe, Harrisson M400 with accessories * Bandsaws Machines: microcut 916 + TR-SA-150 * Pedestal Grinder * many column drills, includingStrands S68, Arboga, etc. * Router: Van Norman * Borslibemaskine, Schanbacher S-3-50 * CO2 welding machines: 2. ESAB MIG 410W with accessories * 2. Migatronic MIG 305 with accessories * many Migatronic Automig 250 XE with equipment * Hydraulic presses, Stenhøj * Belt sander with dust extraction, Scantool 75 x 2000 * Steel Bar Bending Machines * Steel Bar cutters * Guillotines * Press brakes * Crosscut, DeWalt, mounted on a tripod * Magnetic Drill, Hall Powerbor PB70

Factory Equipment: 5 4-column car lifts with and without pit jack (Stenhøj / Werther) * Vice Benches * Welding surfaces with vice * Tool cabinets and trolleys containing hand tools and power tools * Shop trolleys containing hand tools * Tool cabinets, steel * Exhaust Cabinets * Pallet Racks * Steel Shelving * Shop jacks * Truck Charging Station, Jungheinrich 24 V 120 A * 2 compressors * Electric stackers with charger * Electric truck, Linde * Pallet * Strapping Equipment

Auto lifts, etc.: many used and some new + many new hydraulic units for interior lifts: Bucher Hydraulics, Hydraulic Power Units * many new hydraulic cylinders, etc. * parts for assembling auto lifts * Mounting tables for auto lifts * Electrical department with plenty of power cables and electrical components * Hydraulic seat consoles * Semi finished goods * Profiles for building cars * Carpets * Wooden boards * Noise Reduction Materials * Aluminium ramps, foldable * Lots of unused mudguards for trucks and trailers.

Tools: Lots of power tools, air tools, cordless tools.

Consumables: very paints, thinners, Abrasive Discs, cutting discs, bolts, screws, etc..

Office furniture, fine quality, including electric height adjustable desks, shelves, bookcases, room dividers * Office machinery, includingLenovo PC-and flat panel displays, IBM Server with UPS systems, Canon IR 3170 c copier scanner and finisher * Canteen Furniture * Lockers

Other: Tile Cutter, Bennettiere * Lots of tires and rims - used and unused * Car seats * Demo for car seats including car seats * Wheelchairs * Clinic Chair * Antique radio / TV, etc. * Industrial Sewing Machine, DÜRKOPP and much, much more.

Contact: Jens Lynderupl, tel.: +45 53 55 98 53, email: [email protected]

Besichtigung:

Viewing on 26. October from 9 AM to 4 PM CEST

Pickup:

Collection on 31. October + 1. and 2. November. All days from 8 AM to 4 PM

Galerie Liste

50 pr. Seite
100 pr. Seite
200 pr. Seite

Drucken Aktualisieren

1-100 101-200 201-300 301-342

Lathe, Triumph 2000. Max r / min: 2000. Spindle through bore: 55 mm. Centre height: 200 mm. Max. turning length approx. 1000 mm. Accessories: centre rest, three-jack-chuck + various jigs, etc.

Nummer: 0001

Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde

Hersteller: Colchester Modell: Triumph 2000

OK Lifts in liquidation - Online auction - closing 30. October at 1 PM and 2 PM CEST Auktion 81

Lathe, Triumph 2000. Max r / min: 2000. Spindle through bore: 55 mm. Centre height: 200 mm. Max. turning length approx. 1000 mm. Accessories: centre rest, three-jack-chuck + various jigs, etc.

Vice Bench. Length 2 m width: 80 cm

Lathe, Triumph 2000. Max r / min: 2000. Spindle Through Bore: 55 mm. Centre height: 200 mm. Max. turning length approx. 1000 mm. Accessories: Centre rest, four-jack-chuck + various jigs, etc.

Pallet Racking, one-sided. 5 branches. Length approx. 6 m Contents of miscellaneous black iron

Automatic band saw, microcut 916 + extra band + roller conveyor, length approx. 2.5 m

Hydraulic Station

Hydraulic Station

Work Bench with lower shelf. Length approx. 190 cm. Width approx. 60 cm. + 3 callipers + measuring device Mitutoyo + tool panel with content

Trolley with shelf with assortment boxes with content (drills, core drill etc.)

Tool panel with content (various Pipe bending equipment)

Vice bench and lower shelf. Length approx. 185 cm. Width approx. 60 cm + content (hand tools)

Tool panel with content (various cutting tools, drills and milling)

Pedestal Grinder, KEF Slibette 8N

Pillar Drill, Strands S 68. Engine: HP 1.0 / 1.2. R / M 1400/2800

Pillar Drill, Strands S 68. Engine: HP 1.0 / 1.2. R / M 1400/2800. Machine vice. Clamping surface 41 x 27 cm

Pillar Drill, Strands S 68. Engine: HP 1.0 / 1.2. R / M 1400/2800. Clamping surface: Ø 32 cm

Welding rectifier, ESAB LCA 275 + wire feed unit, ESAB A9 + welding wires, welding handle + welding curtains

Milling Machine, Van Norman, model no 2 medium. Serial.: 2185. Clamping surface: 128 x 26 cm. Machine vice

Bit sharpener, Schanbacher type S-3-50

Wall shelf with content (tools included)

Desk with 2 drawers + shelf + bookcase + music rack + 4 chairs + gramophone + LP plates + transistor radio, Super Phone Trans Weekend 10 + antique TV, B & O Master de Luxe Automatic + Antique Radio / TV: Arena / Record Herofon + stencil copier + 2 photos

Desktop + low bookcase, 3 sections + high bookcase, 4 sections + PC, Asus (minus the hard drive) + Flat + chair + small furniture

Content on the ceiling

Plasma Cutter, Migatronic PDX 70 + welding cables + visor

CO2 welder, ESAB MIG 410W + wire feed unit, ESAB Feed 304 + welding cables and welding handle

Welding surface with vice, 126 x 90 cm

Tool cabinet on wheels containing various hand tools

Trolley with 3 power tools: 2 x angle grinder, DeWalt D28151 - QS + angle grinder, Hitachi G 13SR3, fitted with Abrasive Discs + various extra Abrasive Discs

2 platforms for lift, exterior, width approx. 128 cm, length approx. 170 cm.

Hydraulic press, Stenhøj, 15 ton

Hydraulic press, Stenhøj 16 + various press tools

Hydraulic press, unknown product

Hydraulic lift truck + dolly

Pallereol, 2 sections, 3 beams, width approx. 2 m + truck guard

Tool trolley, Kraftwerk, 5 drawers + content on the trolley and in drawers

Trolley with tool box containing + 3 x Angle Grinders+ Abrasive Discs and cutting discs + steel rack with content

Welding surface with vice. Table top: approx. 200 x 100 x 1 cm

CO2 welder, Migatronic MIG 305 with welding cable and welding handle + welding helmet + pressure gauge

Tile Cutter, Bennetiere

Steel Shelving with content + tool cabinet on wheels with content

Welding surface with vice. Table top: approx. 127 x 85 x 0.8 cm

CO2 welder, ESAB MIG 410W + wire feed unit, ESAB Feed 304 + welding cables and welding handle + welding helmet

CO2 welder, Migatronic Automig 250 XE + welding cables + welding handle + welding helmet + pressure gauges

Welding surface with vice. Table top approx. 126 x 90 x 0.8 cm

Belt grinder, Scantool, 75 x 200 mm + exhaust

Welding surface with vice + 2 steel shelves with content. Table top: approx. 200 x 100 x 1 cm

CO2 welder, Migatronic Automig 250 XE + welding cables + welding handle + welding helmet + pressure gauges

Tool cabinet on wheels containing various hand tools

Car Lift, used. Remote control with cable. Viking

Car Lift, used. Remote control with cable. Viking

Flat iron folding machine on column

Workshop trolley + content: assortment boxes, steel

CO2 welder, Migatronic MIG 305 with welding cable and welding handle + welding helmet + pressure gauge

Tool cabinet on wheels containing various hand tools

Welding surface with vice, table top approx. 160 x 70 + tools on board

Steel Shelving with content

Steel Bar Cutter

CO2 welder, Migatronic Automig 250 XE + welding cables + welding handle + welding helmet

Pallet rack, 2 sections, 3 beams, width approx. 2 m + truck guard

3 ceiling fans

Grid Plates, unused. Maximum plate dimension: approx. 130 x 120 cm

Oxygen and acetylene trolley with hoses and gauges

Wheelbarrow, Ravendo + hose cart with hose

Pallet rack, 2 sections, 4 beams, width approx. 2m

Table + 5 paint sprayers + oil spray (unused), etc.

Exhaust Cabinet with content (solvents, etc.) + 4 bucks + painter suits, unused

Exhaust Cabinet with content (solvents, etc.)

Lot metals: semi manufactured goods, clamping frames, cantilever rack, 6 m containing steel, steel rack with grid plates, plate rack with content etc.

Guillotine, Chr Bold Eftf Max. cutting width: approx. 1050 mm

Automatic band saw, STG 220 GHA. Additional bands + lazy jack

Bench Grinder

Shop jack, Stenhøj

Used Car Lift, remote control with cable

Used Car Lift, remote control with cable

Pallet rack, 2 sections, 4 beams, approx. 3 m, height approx. 3 m Truck Guard

Platform for Car Lift, galvanized. Dimensions: width approx. 132 cm, length approx. 165 cm

Half Pallet with about. 8 hydraulic cylinders

Platform for Car Lift, galvanized. Dimensions: width approx. 132 cm, length approx. 165 cm. Used

Work bench on wheels with vice + Assortment rack with content

OK Lifts in liquidation - Online auction - closing 30. October at 1 PM and 2 PM CEST
Auktion 81