Adresse:
KJ Auction has been commissioned by the administrator of OK Lifte A/S in administration to dispose all operating assets by online public auction. The auction closes with 200 lots at. 1 PM and remaining lots at 2 PM CEST
The catalog has approx. 350 lots and closes with 200 lots at a time. Each lot goes into extended time when it is bidded within in the final 10 minutes before the auction closes. This means that the closing time of the lot will be extendeded by additional 10 minutes from the time the bid was submitted. We recommend to click lots to the whatch list and then click the Bid Manager button. Showing only products that are clicked or bidded, so you can more easily manage your bids when the auction closes. If you cannot bid during actual closing time you can still participate as if you were if you have the highest autobid. All bids act as Auto Bid, the system automatically bids on your behalf as long as you have the highest Auto Bid.
Featured lots:
Equipment: 2 x lathe, Triumph 2000 with accessories * Lathe, Harrisson M400 with accessories * Bandsaws Machines: microcut 916 + TR-SA-150 * Pedestal Grinder * many column drills, includingStrands S68, Arboga, etc. * Router: Van Norman * Borslibemaskine, Schanbacher S-3-50 * CO2 welding machines: 2. ESAB MIG 410W with accessories * 2. Migatronic MIG 305 with accessories * many Migatronic Automig 250 XE with equipment * Hydraulic presses, Stenhøj * Belt sander with dust extraction, Scantool 75 x 2000 * Steel Bar Bending Machines * Steel Bar cutters * Guillotines * Press brakes * Crosscut, DeWalt, mounted on a tripod * Magnetic Drill, Hall Powerbor PB70
Factory Equipment: 5 4-column car lifts with and without pit jack (Stenhøj / Werther) * Vice Benches * Welding surfaces with vice * Tool cabinets and trolleys containing hand tools and power tools * Shop trolleys containing hand tools * Tool cabinets, steel * Exhaust Cabinets * Pallet Racks * Steel Shelving * Shop jacks * Truck Charging Station, Jungheinrich 24 V 120 A * 2 compressors * Electric stackers with charger * Electric truck, Linde * Pallet * Strapping Equipment
Auto lifts, etc.: many used and some new + many new hydraulic units for interior lifts: Bucher Hydraulics, Hydraulic Power Units * many new hydraulic cylinders, etc. * parts for assembling auto lifts * Mounting tables for auto lifts * Electrical department with plenty of power cables and electrical components * Hydraulic seat consoles * Semi finished goods * Profiles for building cars * Carpets * Wooden boards * Noise Reduction Materials * Aluminium ramps, foldable * Lots of unused mudguards for trucks and trailers.
Tools: Lots of power tools, air tools, cordless tools.
Consumables: very paints, thinners, Abrasive Discs, cutting discs, bolts, screws, etc..
Office furniture, fine quality, including electric height adjustable desks, shelves, bookcases, room dividers * Office machinery, includingLenovo PC-and flat panel displays, IBM Server with UPS systems, Canon IR 3170 c copier scanner and finisher * Canteen Furniture * Lockers
Other: Tile Cutter, Bennettiere * Lots of tires and rims - used and unused * Car seats * Demo for car seats including car seats * Wheelchairs * Clinic Chair * Antique radio / TV, etc. * Industrial Sewing Machine, DÜRKOPP and much, much more.
Contact: Jens Lynderupl, tel.: +45 53 55 98 53, email: [email protected]
 |
 |
 |
.jpg) |
 |
 |
Besichtigung:
Viewing on 26. October from 9 AM to 4 PM CEST
Pickup:
Collection on 31. October + 1. and 2. November. All days from 8 AM to 4 PM
Lathe, Triumph 2000. Max r / min: 2000. Spindle through bore: 55 mm. Centre height: 200 mm. Max. turning length approx. 1000 mm. Accessories: centre rest, three-jack-chuck + various jigs, etc.
Nummer: 0001
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Colchester Modell: Triumph 2000
Vice Bench. Length 2 m width: 80 cm
Nummer: 0002
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Lathe, Triumph 2000. Max r / min: 2000. Spindle Through Bore: 55 mm. Centre height: 200 mm. Max. turning length approx. 1000 mm. Accessories: Centre rest, four-jack-chuck + various jigs, etc.
Nummer: 0003
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Colchester Modell: Triumph 2000
Pallet Racking, one-sided. 5 branches. Length approx. 6 m Contents of miscellaneous black iron
Nummer: 0004
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Automatic band saw, microcut 916 + extra band + roller conveyor, length approx. 2.5 m
Nummer: 0005
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Microcut Modell: 916
Work Bench with lower shelf. Length approx. 190 cm. Width approx. 60 cm. + 3 callipers + measuring device Mitutoyo + tool panel with content
Nummer: 0008
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Trolley with shelf with assortment boxes with content (drills, core drill etc.)
Nummer: 0009
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Tool panel with content (various Pipe bending equipment)
Nummer: 0010
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Vice bench and lower shelf. Length approx. 185 cm. Width approx. 60 cm + content (hand tools)
Nummer: 0011
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Tool panel with content (various cutting tools, drills and milling)
Nummer: 0012
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Pedestal Grinder, KEF Slibette 8N
Nummer: 0013
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: KEF Modell: Slibette 8N
Pillar Drill, Strands S 68. Engine: HP 1.0 / 1.2. R / M 1400/2800
Nummer: 0014
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Strands Modell: S 68
Pillar Drill, Strands S 68. Engine: HP 1.0 / 1.2. R / M 1400/2800. Machine vice. Clamping surface 41 x 27 cm
Nummer: 0015
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Strands Modell: S 68
Pillar Drill, Strands S 68. Engine: HP 1.0 / 1.2. R / M 1400/2800. Clamping surface: Ø 32 cm
Nummer: 0016
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Strands Modell: S 68
Welding rectifier, ESAB LCA 275 + wire feed unit, ESAB A9 + welding wires, welding handle + welding curtains
Nummer: 0017
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: ESAB Modell: LCA 275
Milling Machine, Van Norman, model no 2 medium. Serial.: 2185. Clamping surface: 128 x 26 cm. Machine vice
Nummer: 0018
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Bit sharpener, Schanbacher type S-3-50
Nummer: 0019
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Van Norman Modell: No 2 Medium
Wall shelf with content (tools included)
Nummer: 0020
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Schanbacher Modell: S-3-50
Desk with 2 drawers + shelf + bookcase + music rack + 4 chairs + gramophone + LP plates + transistor radio, Super Phone Trans Weekend 10 + antique TV, B & O Master de Luxe Automatic + Antique Radio / TV: Arena / Record Herofon + stencil copier + 2 photos
Nummer: 0021
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Desktop + low bookcase, 3 sections + high bookcase, 4 sections + PC, Asus (minus the hard drive) + Flat + chair + small furniture
Nummer: 0022
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Content on the ceiling
Nummer: 0023
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Plasma Cutter, Migatronic PDX 70 + welding cables + visor
Nummer: 0024
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Migatronic Modell: PDX 70
CO2 welder, ESAB MIG 410W + wire feed unit, ESAB Feed 304 + welding cables and welding handle
Nummer: 0025
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: ESAB Modell: MIG 410W
Welding surface with vice, 126 x 90 cm
Nummer: 0026
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Tool cabinet on wheels containing various hand tools
Nummer: 0027
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Trolley with 3 power tools: 2 x angle grinder, DeWalt D28151 - QS + angle grinder, Hitachi G 13SR3, fitted with Abrasive Discs + various extra Abrasive Discs
Nummer: 0028
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
2 platforms for lift, exterior, width approx. 128 cm, length approx. 170 cm.
Nummer: 0029
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hydraulic press, Stenhøj, 15 ton
Nummer: 0030
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Stenhøj
Hydraulic press, Stenhøj 16 + various press tools
Nummer: 0031
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Stenhøj
Hydraulic press, unknown product
Nummer: 0032
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hydraulic lift truck + dolly
Nummer: 0033
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Pallereol, 2 sections, 3 beams, width approx. 2 m + truck guard
Nummer: 0034
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Tool trolley, Kraftwerk, 5 drawers + content on the trolley and in drawers
Nummer: 0035
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Trolley with tool box containing + 3 x Angle Grinders+ Abrasive Discs and cutting discs + steel rack with content
Nummer: 0036
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Welding surface with vice. Table top: approx. 200 x 100 x 1 cm
Nummer: 0037
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
CO2 welder, Migatronic MIG 305 with welding cable and welding handle + welding helmet + pressure gauge
Nummer: 0038
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Migatronic Modell: MIG 305
Tile Cutter, Bennetiere
Nummer: 0039
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Steel Shelving with content + tool cabinet on wheels with content
Nummer: 0040
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Welding surface with vice. Table top: approx. 127 x 85 x 0.8 cm
Nummer: 0041
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
CO2 welder, ESAB MIG 410W + wire feed unit, ESAB Feed 304 + welding cables and welding handle + welding helmet
Nummer: 0042
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
CO2 welder, Migatronic Automig 250 XE + welding cables + welding handle + welding helmet + pressure gauges
Nummer: 0043
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Migatronic Modell: Automig 250 XE
Welding surface with vice. Table top approx. 126 x 90 x 0.8 cm
Nummer: 0044
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Belt grinder, Scantool, 75 x 200 mm + exhaust
Nummer: 0045
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: Scantool
Welding surface with vice + 2 steel shelves with content. Table top: approx. 200 x 100 x 1 cm
Nummer: 0046
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
CO2 welder, Migatronic Automig 250 XE + welding cables + welding handle + welding helmet + pressure gauges
Nummer: 0047
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Tool cabinet on wheels containing various hand tools
Nummer: 0048
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Car Lift, used. Remote control with cable. Viking
Nummer: 0049
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Car Lift, used. Remote control with cable. Viking
Nummer: 0050
Adresse: OK Lifte A/S under konkurs, Industrivej 5, 9280 Storvorde
Hersteller: OK Viking