Online event 132: liquidation auction of Ballen Maskinfabrik closing on 5. November 2013 at 1 PM CEST
Auktion 132
Adresse:
Ballenvej 50, 8305 Samsø, Denmark
By instruction of the administrator KJ Auktion will be disposing all equipment from the estate: Ballen Maskinfabrik, Samsø, Denmark
Contact: Jens Lynderup, tel.: +45 53 55 98 53, email: [email protected]
Rigging and shipping: Yoy may choose to contact. Brdr. Kjeldahl, Samsø, Lasse Hjulmand, tel. +45 86596485, email: lh@brdr-kjeldahl.dk
|
Featured lots:
Machine tools: Lathe, Tos Trencin model: SN40 B. Carriage length approx. 2000 mm, Bore approx. 55 mm * Lathe, Tos Trencin, SN 55. Slide Length: approx. 3220 mm. Bore: approx. 70 mm * Stationary wet grinder, Inelco Ultima Tig (grinding of tungsten electrodes) * Drill press, PRMT Z5025-1A with clamping surface * Portable band saw, Macc MINI CUT * Belt sander, TAS-75 * Co2 welding machine, Migatronic PI 250, with torches + trolley * Folding machine, HM HS-2S 2201, 1020 x 2.0 mm * Guillotine, Göteneds, 13 x 3000 mm * Portable Oxy Fuel Cutting Machine * Roll Machine, RBM 30HV horizontal and vertical + trolley with bending tool * Welding machine, plasma PDX85 * Co2 welding machine, Kemppi Weld 400W + wire feed box, KempoWeld Wire 400 * Combined iron worker, GEKA Microcrop + tool cart, Haze, with tools * Workshop Press, AC, 20 Ton, hand hydraulic, year 2001 * Tig welder, Kemppi Master Tig 1500 * Migatronic Delta 160 E * Co2 welding machine, Migatronic Rally Me 161 * Tig welder, Kemppi Master Tig AC / DC 2500w * Co2 welder, Migatronic MIG 445 + wire feed box * Drilling Works, MJ, type S832, with machine vice * TIG welder, Esab Aristo tig LDV320 + MEK 4C wire feed box + remote control * Folding machine, WMW 2 x 2000 mm * Motorized roller + flat iron folding machine * Band saw, Stark 280 SX, Jet control, year 2000 + inlet conveyor, approx. 6 meters, width approx. 420.
Factory equipment: Several Workshop Trolleys, Blika, including content * Industrial Vacuum Cleaner, Ghibli * Many stepladders * 2 x compressors, Hercules LT24 * Extraction table, Esvent, year 2006. Model: USB2500 * Compressor, FF Mistral, 500 liters
Lifting and shifting equipment: Forklift, LPG, NettoTruck, 2.5 ton free sight mast, hours: 1660, year 2006. Lifting height 3.6 m, tower height 2.20 m * Pallet with chain hoists, 2 x of 3000 kg each + 1 x 1250 kg * Truck Crane, HMF, 2500 kg, reach around 6.7 meters * Tractor, Massey Ferguson MF185 Multi Power, Condition unknown * Several Jib crane with Demag 500 kg electric hoist, c. 4 meters reach * Cross-member Cranes including with Euro Chain 500 kg electric hoist. Approximately 6 meters span
Besichtigung:
Friday 1. November from 10 AM to 4 PM
Pickup:
Wednesday 6. + Thursday 7. from 9 AM to 4 PM + Friday 8. November from 9 AM to 3 PM
Lathe, Tos Trencin model: SN40 B, Serial No. 040150766955, 380 V, 12.2 A 50 Hz 6.6 kva. Carriage length approx. 2000 mm, Bore approx. 55 mm
Nummer: 0001
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Hersteller: Tos Trencin Modell: SN 40 B
Steel cabinet containing various steel tools + gauging tools, etc.
Nummer: 0004
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Steel cabinet containing various drills + reamers, etc.
Nummer: 0005
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Filing cabinet with 2 drawers without key + barrels + buckets etc.
Nummer: 0006
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Workshop trolley, Blika, containing various drills + hand tools, etc.
Nummer: 0007
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Stationary wet grinder, Inelco Ultima Tig (grinding of tungsten electrodes)
Nummer: 0008
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Drill press, PRMT Z5025-1A with clamping surface. Manual height adjustable surfac and drill work. Max. Capacity: 25mm. Max. 2900 rpm / min
Nummer: 0010
Adresse: Ballenvej 50, 8305 Ballen, Samsø
2 x Power Tools + aku screwdriver + 2 boxes of drills
Nummer: 0011
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Lathe, Tos Trencin, SN 55, Serial No. 0,412,421. Slide Length: approx. 3220 mm. Boring: approx. 70 mm
Nummer: 0013
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Hersteller: Tos Trencin Modell: SN 55
Aku screwdriver, Metabo, with battery + charger + lamp
Nummer: 0014
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Angle Grinder, Hitachi + grinder, Bosch PEX 400 AE
Nummer: 0015
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Radio, Dewalt + screwdriver, Dewalt + angle grinder Metabo
Nummer: 0016
Adresse: Ballenvej 50, 8305 Ballen, Samsø
2 wooden boxes with assorted cut tabs + cut hills.
Nummer: 0020
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Milling machine, Hero 1A, with clamping surface, 120 x 27, with machine vice + various milling tools
Nummer: 0022
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Hersteller: Hero Modell: 1A
Rack with various drills + milling tools + reamers + gauging tools, etc.
Nummer: 0023
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Box with pliers + clamps + Nilfisk C110.3 pressure washer + residue in the corner
Nummer: 0024
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Welding surface, 1000 x 1470 x 10 mm, with vice + various boxes on the shelf under the welding surface
Nummer: 0029
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Belt sander, TAS-75, 75 x 2000. Serial No. 2002/108634
Nummer: 0030
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Everything on the ceiling to the left of the staircase. Various suction + flex hoses + sink + cable + miscellaneous consumables. (Everything must be collected)
Nummer: 0031
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Everything on the ceiling to the right of the staircase. Rack with content tools + screws and bolts and threaded rods + belts + electric parts + valves + paint etc. (Everything must be collected)
Nummer: 0032
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Co2 welding machine, Migatronic PI 250, with torches, mounted on a trolley
Nummer: 0034
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Foot hydraulic pump, Nike PP70A-1000, with hydraulic cylinder
Nummer: 0035
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Folding machine, HM HS-2S 2201, 1020 x 2.0 mm
Nummer: 0036
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Box containing various welding electrodes + fittings + cutting discs etc.
Nummer: 0037
Adresse: Ballenvej 50, 8305 Ballen, Samsø
3 pallets with screws + bolts + nuts + tripod with various metal panel + cut offs
Nummer: 0038
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Rack containing various tools + socket sets etc.
Nummer: 0039
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Workshop trolley, Blika, containing various hand tools etc.
Nummer: 0040
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Cordless caulking gun, Lincoln, with battery + charger
Nummer: 0041
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Steel Shelving containing screws + bolts + Tools + bolt racks with content, etc.
Nummer: 0042
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Chemical cabinet with exhaust + drip trays containing various consumables etc.
Nummer: 0043
Adresse: Ballenvej 50, 8305 Ballen, Samsø
EL sit / stand desks + office chairs + 3 + 5 racks + 2 desks + drawer + 2 + whiteboard + table
Nummer: 0049
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Stand with metal panels and more along the wall
Nummer: 0053
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Oxygen meter, PBI Dansensor, Oxygenindicator SGI-2
Nummer: 0067
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Roll Machine, RBM 30HV horizontal and vertical + trolley with bending tool
Nummer: 0088
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Forklift, LPG, NettoTruck, 2.5 ton free sight mast, hours: 1660, year 2006. Lifting height 3.6 m, tower height 2.20 m. Not to be collected until 8. november at 4 PM
Nummer: 0094
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Hersteller: Nettotruck Herstellungsdatum: 2006
Welding surface, 2000 x 1000 x 10 mm with content
Nummer: 0095
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Pallet with chain hoists, 2 x of 3000 kg each + 1 x 1250 kg
Nummer: 0096
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Workshop trolley, Blika, containing various hand tools etc.
Nummer: 0097
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Workshop trolley containing various hand tools
Nummer: 0101
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Cylinder trolley with oxygene / acetylene burner + cylinder trolley
Nummer: 0102
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Co2 welding machine, Kemppi Weld 400W + wire feed box, KempoWeld Wire 400
Nummer: 0103
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Pallet with various welding bends + bolting flanges etc.
Nummer: 0115
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Trolley with content + pallet with steel + miscellaneous in pallet racking
Nummer: 0116
Adresse: Ballenvej 50, 8305 Ballen, Samsø
3 span steel rack, 18 beams + 4 gables, without content
Nummer: 0117
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Combined iron worker, GEKA Microcrop + tool cart, Haze, with tools
Nummer: 0120
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Hersteller: GEKA
Workshop Press, AC, 20 Ton, hand hydraulic, year 2001
Nummer: 0121
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Clamping surface without content + steel cabinet with content
Nummer: 0122
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Co2 welder, Migatronic MIG 445 + wire feed box
Nummer: 0129
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Drilling Works, MJ, type S832, with machine vice
Nummer: 0132
Adresse: Ballenvej 50, 8305 Ballen, Samsø
TIG welder, Esab Aristo tig LDV320 + MEK 4C wire feed box + remote control
Nummer: 0133
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Trolley with screws + bolts + chair + lazy jacks
Nummer: 0135
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Motorized welder, Migatronic TS 222 with Briggs & Stratton engine, V-twin
Nummer: 0136
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Washing machine, Samsung 6 kg + Zanussi Dryer
Nummer: 0138
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Band saw, Stark 280 SX, Jet control, year 2000 + inlet conveyor, approx. 6 meters, width approx. 420. Content on the shelf not included
Nummer: 0144
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Content in rack + content of the saw table. Aluminum + stainless steel + mild steel etc.
Nummer: 0146
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Extraction table, Esvent, year 2006. Model: USB2500
Nummer: 0147
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Clamping surface / welding surface built on a carriage of pallets, 1000 x 1850 mm
Nummer: 0148
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Steel rack with content incl. various panels on site, + H-profiles + I-profiles
Nummer: 0149
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Truck Crane, HMF, 2500 kg, reach around 6.7 meters
Nummer: 0151
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Tractor, Massey Ferguson MF185 Multi Power, Condition unknown
Nummer: 0153
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Welding surface with vice, 2000 x 1000 + flat iron folding machine
Nummer: 0154
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Table with welding exhaust, etc. + rack with content + pallet fixtures
Nummer: 0159
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Press + various electricity boards + special structure, etc.
Nummer: 0160
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Jib crane with Demag 500 kg electric hoist, c. 4 meters reach. Pillar not included
Nummer: 0162
Adresse: Ballenvej 50, 8305 Ballen, Samsø
2 x jib arms without electric hoists, ca. 4 meter reach
Nummer: 0164
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Pillar jib crane with 250 kg Kito electric hoist. Pillar not included
Nummer: 0165
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Cross-member Crane with Elektus 250 kg electric hoist, c. 6 meter span. Crane Gantry not included
Nummer: 0166
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Cross-member Crane with Euro Chain 500 kg electric hoist. Approximately 6 meters span. Crane Gantry not included
Nummer: 0167
Adresse: Ballenvej 50, 8305 Ballen, Samsø
Cross-member crane with electric hoist. Span approx. 6 meters. Crane Gantry not included
Nummer: 0168
Adresse: Ballenvej 50, 8305 Ballen, Samsø