KJ Auktion online event # 144: liquidation auction, Finsø Maskinfabrik (engineering)
Auktion 144

Name: Auktion 144 KJ Auktion online event # 144: liquidation auction, Finsø Maskinfabrik (engineering)
Start: 2014-01-28T13:00:00+01:00
End: 2014-01-28T13:00:00+01:00
Location: Håndværkervej 4 B, 6261, Bredebro, Denmark

Zeigen terms and conditions

Fängt an zu schließen Tuesday 28 January 13:00

Adresse:
Håndværkervej 4 B, 6261, Bredebro, Denmark

Beschreibung:

By instruction of the administrator KJ Auktion will be disposing all assets from the former Firnsø Maskinabrik (engineering) by online auction

Pallets and pallet collars not included due to third party owner. Buyer may choose to bring own pallet and pallet collars to swap instead of reloading

Featured lots:

Machine tools: Horizontal machining center, Stama-MC500 with 5 vacuum surfaces. Fanuc control* Universal grinder, Thörns * Workshop hydraulic presses, Stenhøj, 25 ton, 40 ton, 100 ton * Deburrers, Omca * Bench grinders * Belt grinders * Column Grinders * Magnetic drills * Vertical Belt Grinders * Guillotine, Knuth Werkzeugmaschinen, model KHT HGT 3012, 3100 x 12 mm. Digital readou and backgauge * Powered sheet roll, PBR, 1270 x 90 x 2,5 * Wire EDM, Agie Agiecut Classic 2 * Hydraulic Presses, Hydraulico, 285 ton * Hydraulico, 1300 ton * Horizontal flat grinder, Jacobsen * Bed milling machine, Mikron WF2 SA * Tooling Center, 50 ton * Tool crimper, Nineck, Induktherm-Compact-3 kw *

Lifting and transport: Column Jib Cranes, 500 kg, 1000 kg hoists * Powered truck, BV SE5 * Stackers * Counterbalance truck, Toyota 25, model 7FB25 * Counterbalance diesel truck, Heden 76120, 12 ton * Electrical counterbalance truck, NK 641, type FBT 13 *

FFactory equipment: Tool trooleys with vice * Pallet trucks * Material trooleys for europallets * Work benches* Cantilever racks (with content) * Steel racks* Pallet racks * Tilting containers * Compressors *

Vehicles: 2 stk. vans, Citroën Jumper

Lots of very high standard of office furnitur and equipment.

Besichtigung:

Friday, 24. January 2014 from 10 AM to 4 PM

Pickup:

29. + 30. +31. January 2014 from 10 AM to 4 PM

Galerie Liste

50 pr. Seite
100 pr. Seite
200 pr. Seite

Drucken Aktualisieren

1-50 51-100 101-150 151-200 201-250 251-300 301-350 351-400 401-407

Vertical Machining Center, Stama MC-500 inclusive. 5 vacuum plans. Control: Fanuc. Travel X axis: 5000, Y: 630, Z: 380 Spindle speed: 6000 r / min. Year 1986. Accessories and tools in cabinet and stand

Nummer: 0001

Adresse: Håndværkervej 4 B, 6261 Bredebro

KJ Auktion online event # 144: liquidation auction, Finsø Maskinfabrik (engineering) Auktion 144

Vertical Machining Center, Stama MC-500 inclusive. 5 vacuum plans. Control: Fanuc. Travel X axis: 5000, Y: 630, Z: 380 Spindle speed: 6000 r / min. Year 1986. Accessories and tools in cabinet and stand

Pillar jib crane with electric hoist, Stahl 500 kg. Reach approx. 3 meters. Hook Height approx. 2.5 meters

Tilting container with contents

Floor Sweeper, Auto Floor Tech 350

Wire Sawing Machine, Agie Agiecut Classic 2 type MC2 DAMC 2/3. Year 2000. Unit with accessories

1-column hydraulic press, Hydraulico, 285 tons. Working surface: 110 x 950 mm

Hydraulic Station, Hydra. Max. Pressure: 210 bar. Flow: 6 lpm. Pump type: 20.04D. Filter: MPT 0202-001

8-column hydraulic press, Hydraulico, 1300 tons. T038 press. Opening: 1400 mm. Min. 600 mm. Working surface: 280x1580 mm. Control: Siemens Coros OP25. Safety Enclosure: Troax.

Tool Box with tools for press

Belt grinder, HM, type TAS-75. 75x2000 mm. No. 2002/108692

Work, 170x85 + box with plastic film under table

Orbital sander, Jacobsen. 3 magnet working surfaces + various grinding wheels and so on. Manual

Milling, Mikron WF 2SA. Control: Micron. Clamping surface: 800 x 300 mm. Machine vice. Manual

Machine vice, Forza

Work Bench, c. 200 x 77 cm + vice + tool board + drawer + drawer section

Pressure tank with refrigerant type dryer, FF. Pressure tank: 1000 liters, 10.5 bar, year 1999. Safety mesh at compressor

Tool trolley with vice and content, including cordless drill, Makita, ø13 mm, 6337D + Cordless Impact Wrench, Makita + 2 batteries + charger + hand tools and more

2 pallets of assorted springs. Pallet not included

Pallet with various filters, including Mann H15 190/16 and Mann H34 / 1390 QC. Pallet not included

Material truck for euro pallet containing: tool bit tips, milling tools, etc.. Pallet not included

Material truck euro pallet + container, 20 liter mark CRC 3-36 Anti Corrosion

Reamer, Omca Smissatrici, type 850, year 2007

4-column hydraulic Tooling Center, 50 ton. Clamping surface 120 x 138 cm. Jib Crane: Kito, 3 ton

4 material carts for Euro pallets

4 material carts for Euro pallets

Tool Trolley with vice and content including: 2 x power tools, drill and angle grinder, ø 125 mm

4 pallets of miscellaneous. Pallet not included

4 material carts for Euro pallets. Pallet not included

Pallet with lifting straps, cargo straps, etc. Pallet not included

4 x material trolley for Euro pallets

Pallet with 3 x round steel, labelled quality s355J2. After EN10025-1 and 2 Dark Alumin. Material certificate 3.1 to EN 10204. 400 mm, 4 pcs. à 235 mm. Weight approx. 700 kg. Pallet not included

Pallet with 3 x round steel, labelled quality s355J2. After EN10025-1 and 2 Dark Alumin. Material certificate 3.1 to EN 10204. 400 mm, 4 pcs. à 235 mm. Weight approx. 700 kg. Pallet not included

Welding surface, 1500 x 1500 x 10 mm + miscellaneous

Magnet lifting yoke, Certex, No. 58459, DD11-2005. 20 kg

Demagnetizer, Demagnetizer Model HD-200

Portable working bench, 249 x 75 cm, with shelf + miscellaneous

Pedestal Grinder, KEF Aldell D48, type PSD5

Trolley with 14 bolt racks, etc. with content

4 x Material carriage of euro pallets

3 material carts for Euro pallets + various content

Belt sander, Profiline Metal Belt Grinder, Model BG-752, 75 x 2000 mm

Hand hydraulic press, Stenhøj, 400 kN

5 trestles, width approx. 80 x height approx. 70 cm

Tool Box, Bott, with content + various

5 trestles, width approx. 80 x height approx. 70 cm

Universal tool grinder Thörns + accessories

6 trestles, width approx. 80 x height approx. 70 cm

Pallet with various computers and flat panel displays. Pallet not included

4 material carts for Euro pallets

Pallet with lifting straps, cargo straps with buckles, etc. Pallet not included

KJ Auktion online event # 144: liquidation auction, Finsø Maskinfabrik (engineering)
Auktion 144