KJ Auktion online event #196: liquidation sale, Marsh Wind Technology, part 3, starts closing 9. Sept. 2014 at 1 PM CEST
Auktion 196

Adresse:
Mørupvej 24, 7400 Herning, Denmark

KJ Aukction 196 is 3rd. sales event from the liquidated wind turbine tower manufacturerer, Marsh Wind Technology.

The larger equipment and the welding rods and flux will be sold subject to private treaty. This means that if we get an acceptable offer prior to the auction closing time, the sold lots will be removed from the lot catalogue and all bids on those lots will be cancelled.

Featured lots:

Machines: Press brake, Darley EHP 200, year 1998. Used very little. Working length: 5.2 meters. Hydraulic pressure: 160 L. SN: 121,883. Control: Delem DA65. Fitted with CNC controlled folding support system * Sweeper, Dulevo. Hours: 3538 + charger * CO2 welding machine ESAB LAN 400 + wire feed box + welding cables + torch. Mounted in a frame on wheels * Roller bed, approx. 160 x 80 cm + 2 x steel trestles, approx. width 160 cm + lift line * Plasma Cutter, Messer-Griesheim, Portal, type 2400S. Machine no.: 462 Voltage: 3 x 380 Volt. 50 hZ. Length: 17 meters * Plasma Cutting Table, Messer Griesheim Corta KS 1500/2000. Year 1982. SN: 1202041 * Magnetic Drill stand, Nitto KOHKI, type Atra M130 + drill, Duss * Magnetic Drill stand, Nitto KOHKI, type Atra M250 B Auto + drill, Duss D23-11 * Self-propelled chamfering and bevelling machine, OMCA Smussatrici 900, 5-35 mm * Bevelling and chamfering machine, Pullmax, type X93 75375-05 * Bevelling and chamfering machine, Pullmax, type X10 70090-18 * Reciprocating compressor mounted in the frame on wheels, Atlas Copco, type LT 930 UV. 30 bar. Litres / min 1800 *

Welding wire and flux: Very large amounts of welding wire and flux, including: 2.4 mm x 900 kg. Pallet with rods, Hyundai, labeled WindArc M-12K AWS A5.17/ASME SFA5. 17 EM12K. JIS Z3351 YS-S3. EN756-S2Si. * 4.0 mm x 1000 kg. Welding Wire, Hyundai, M-12K. AWS A5.17/ASME SFA5. 17 EM12K. JIS Z3351 YS-S3. EN756-S2Si. * 2 Hyundai Windarc SuperFlux 800 T. AWS A5.17/ASME SFA5. 17 F7A8-EM12K. A 760-SA FHB1. MESH 12x60. Net 20 kg (44lb). Approved by TÜV * Welding Wire, Hyundai Windarc M-12K, Sub Arc Wire, 2.4 x 1000 kg, labeled AWS A5.17/ASME SFA 5.17 EM12K JIS 73351 YS-S3 EN756-S2Si. Approved by CCS, KR, LR, ABS, BV, GL, NK, DNV, TUV, DB, MRS * Welding Wire Rolls, approx. 96 rolls of brand Hyundai Windarc M-12K. AWS A5.17/ASME SFA5.17 EM12K JIS Z3351 YS-S3 A 756-S2Si. 4,0 x25 kg. Approved by KR, LR.ABS, BV, GL, NK, DNV, MRS, TÜV *

Lifting and transport equipment: Jib Crane (40), wall mounted. Reach approx. 6 meters. Electric hoist, Demag 500 kg * Many overhead cranes, among others. 5,000 kg. Electric hoist on cross-member, Demag. Area, 5,000 kg. 2 speed up / down. Span approx. 14 meters * Overhead Crane, 10000 kg. Electric hoist on cross-member. Demag + hook, 10 ton. 2 speeds + F1 and F2. Span approx. 14 meters * Connecting bar for wheel loader * Pallet with various lifting chains + hooks. Approved + pallet with steel wires, eyelets, shackles, etc. * Sheet metal clamps * Pallet with 2 x lever blocks, 1.6 ton + 2 x spindle clamp, 1500 kg + 2 x sheet metal clamp, 1000 kg, 0-20 mm + 4 x sheet metal clamp, 1000 kg. + Lever block + 3 x shackles * Pallet with 3 x lifting hooks, 10 + ton lifting hook, 16 ton * Many electric hoists, Demag, 1000 kg with and without trolley etc. * Vacuum lifter, Carl Stahl. Lifting capacity 1050 kg. Net Weight 700 kg. Length 10.5 m. Approved *

Factory Equipment: Tractor, John Deere, model 4400 HST. Fitted with front linkage with A-frame + box on the 3-point hitch. Cab: F007 model. Hydraulic outlet to the rear. Tread: Front approx. 30%. Rear approx. 30%. Rotating beacon * Local exhaust ventilation, wall mounted * Tools * File Cabinets Benches with and without vice and tool board with light * Hydraulic broom, A-frame. Width approx. 150 cm * 

Besichtigung:

Friday 5. September 2014 from 9 AM to 3 PM

Pickup:

Thursday, 11. Septembeber from 8 AM to 4 PM + 12. September from 8 AM to 3 PM CEST