Woodworking Machines, Online Exchange - closing 11. April 2012 at 1 PM CET
Auktion 68

Zeigen terms and conditions

Fängt an zu schließen Wednesday 11 April 13:00

Adresse:

Beschreibung:

Disposal of machinery and equipment from NJA Furniture, Nors and other customers

NJA Furniture has decided to clean up the stock of machinery and equipment that they no longer require internally.

Featured lots:

· Moulding machine, Wadkin GA5710, 7-spindle.

· Punching Machine for prepaing of drilling

· Bandsaw, Griggio SNAC 640

·Throughfeed Drilling Machine, Rilesa type VLG

· Double Panel Saw, Rüco

· Cabinet Presses, Hoffmeister

· Mitre, Stromab RS 65

· Shrink tunnel, Haunstrup Ekco

· Triangle presses, air driven.

· Gering cutter, Morso

Preview by appointment. NJA Furniture A/S, Håndværkervej 3-7, Nors, 7700 Thisted. Contact: Kent Andersen, tlf.: 40 92 19 15, email: [email protected]

Payment for this auction may only be done by money transfer to KJ Auktion bank account not later than 16. April. It is not possible to pay on site.

Besichtigung:

NJA: by appointment only. Contact Kent, tlf. +45 40921915

Pickup:

NJA: by appointment only. Contact Kent, tlf. +45 40921915

Galerie Liste

50 pr. Seite
100 pr. Seite
200 pr. Seite

Drucken Aktualisieren

Empty lot — 0001

Empty lot

Nur Mehrwertsteuer auf Käuferhonorar

Punching machine to make a dot in the wood before boring. Two rows of 36 needles each. Air powered — 0002

Punching machine to make a dot in the wood before boring. Two rows of 36 needles each. Air powered

Split Saw, Amstrup. Fitted with Feeding unit, Maggi OM3128 — 0003

Split Saw, Amstrup. Fitted with Feeding unit, Maggi OM3128

Mitre Cutter, Morsø, type EHF 51547 — 0004

Mitre Cutter, Morsø, type EHF 51547

Belt strapper, Strapex, type 534,100,001. SERIAL NO. 2567 — 0005

Belt strapper, Strapex, type 534,100,001. SERIAL NO. 2567

Casesse underpinner for joining frames. Uses Casesse wedges of different sizes — 0006

Casesse underpinner for joining frames. Uses Casesse wedges of different sizes

Casesse underpinner for joining frames. Uses Casesse wedges of different sizes — 0007

Casesse underpinner for joining frames. Uses Casesse wedges of different sizes

Luftvacuumløfteåg, AL Vacuum Technique, model Elstabler. Year 2000. Range: 1.6 m Lifting Height: 1.5 meters Capacity: 75 kg — 0008

Luftvacuumløfteåg, AL Vacuum Technique, model Elstabler. Year 2000. Range: 1.6 m Lifting Height: 1.5 meters Capacity: 75 kg

Luftvacuumløfteåg, AL Vacuum Technique, model Elstabler. Year 2000. Range: 1.6 m Lifting Height: 1.5 meters Capacity: 75 kg — 0009

Luftvacuumløfteåg, AL Vacuum Technique, model Elstabler. Year 2000. Range: 1.6 m Lifting Height: 1.5 meters Capacity: 75 kg

Luftvacuumløfteåg, AL Vacuum Technique, model Elstabler. Year 2000. Range: 1.6 m Lifting Height: 1.5 meters Capacity: 75 kg — 0010

Luftvacuumløfteåg, AL Vacuum Technique, model Elstabler. Year 2000. Range: 1.6 m Lifting Height: 1.5 meters Capacity: 75 kg

Cabinet Presses, Hoffmeister. Width: approx. 3 m height approx. 1.8 m — 0011

Cabinet Presses, Hoffmeister. Width: approx. 3 m height approx. 1.8 m

Moulding machine, Wadkin GA5710, 7-spindle. Year 1992? — 0012

Moulding machine, Wadkin GA5710, 7-spindle. Year 1992?

Long belt sander, SAMCO EM75 — 0013

Long belt sander, SAMCO EM75

Measuring Table, M. Conti. BCE25R 15G97. Manufacturing year 1997. XYZ measurement. Dimensions approximately. 3000 x 1100 mm. Vacuum — 0014

Measuring Table, M. Conti. BCE25R 15G97. Manufacturing year 1997. XYZ measurement. Dimensions approximately. 3000 x 1100 mm. Vacuum

Bandsaw, Griggio SNAC 640, SN 9210916. Year 1992 — 0015

Bandsaw, Griggio SNAC 640, SN 9210916. Year 1992

Throughfeed Drill, Rilesa type VLG. Year 1996. Fitted with Accurate ProScale positioning. air-Powered — 0016

Throughfeed Drill, Rilesa type VLG. Year 1996. Fitted with Accurate ProScale positioning. air-Powered

Double panel saw, Rüco. Max. spread approximately. 1.5 m — 0017

Double panel saw, Rüco. Max. spread approximately. 1.5 m

Foil wrapper, Siat — 0018

Foil wrapper, Siat

Tape Closing Machine Ubro, type SM26. Year of manufacture 1993 — 0019

Tape Closing Machine Ubro, type SM26. Year of manufacture 1993

Removed — 0020

Removed

0021

Removed — 0022

Removed

Removed — 0023

Removed

Mitre Saw, Stromab RS 65th Year 1994. Saw Ø350mm. 2800 rpm. Engine: H71, 3HP — 0024

Mitre Saw, Stromab RS 65th Year 1994. Saw Ø350mm. 2800 rpm. Engine: H71, 3HP

Repair Table, for connection to exhaust — 0025

Repair Table, for connection to exhaust

Repair Table, for connection to exhaust — 0026

Repair Table, for connection to exhaust

Non-driven roller conveyors, Q-transport equipment. (2) x 1.10 x length approximately. 5 meters. One section with chain-driven angle transfer — 0027

Non-driven roller conveyors, Q-transport equipment. (2) x 1.10 x length approximately. 5 meters. One section with chain-driven angle transfer

Shrink foil tunnel, Haunstrup Ekco type compact 400. Power: 13.5 kw. Working width: approx. 400mm. Working height approx. 150 mm — 0028

Shrink foil tunnel, Haunstrup Ekco type compact 400. Power: 13.5 kw. Working width: approx. 400mm. Working height approx. 150 mm

Side Belt Sander, Amstrup (12-3) — 0029

Side Belt Sander, Amstrup (12-3)

Side Belt Sander, Amstrup (76101) — 0030

Side Belt Sander, Amstrup (76101)

Triangle presses, air driven. L = length approximately. 2.5 m H = length approximately. 1.3 m — 0031

Triangle presses, air driven. L = length approximately. 2.5 m H = length approximately. 1.3 m

Strapping machine, Strapex, Art. no. 354,100,001. SERIAL NO. 3552 — 0032

Strapping machine, Strapex, Art. no. 354,100,001. SERIAL NO. 3552