Optimizing Crosscut Plant, Paul. Model 14 MKL
Auktion 58 #0004A

Klicken Sie auf ein Bild, um es in Vollgröße anzusehen

Hersteller: Paul Modell: 14 MKL

Beschreibung:

Optimizing Crosscut Plant, Paul. Model 14 MKL Control: 4.0 speed standard 14 MKL. Full Optimization. The plant is designed for the following wood data:
- Arriving workpiece lengths: 500 - 6000 mm
- Workpiece height: 15 to 100 mm
- Width: 40 - 200 mm
- Min. cross-section: 40 to 15 mm
- Max. Cross-section: 100 * 100 mm, 200 * 80 mm
- Max. possible cross-section: 200 * 100 mm
- Wood quality: soft and hard wood:
- Shortened:
- Savru:
- Dried:
- Min. section to be cut: 250 mm
- Max. section to be cut: 3000 mm straight through
- Knots and fault locations can completely be removed:
- Max. section to be dropped: 2500 mm
Workpiece feeding, right:
(1) Conveyor 12.0 m/230 m, bevelled, driven from the machine. Overall Width: 230 mm. Bandwidth: 200 mm. Suitable for mounting on a gauging station with Luminescens detector
(1) gauging unit with lumimescens detector and photocell for workpiece start and finish registration
(1) positioning roller located at the top, strong type, barrel length 379 mm
3 units holding rails located on workpiece feeder, top
3 pressure rollers D225 * 55 easily adjustable on workpiece height located on conveyor inlet, required for model MKL
Workpiece outlet, left: Sawing engine: 7.5 kw, 380 V, 50 hz., 3 phases. HM Saw blade 570 4.3 * 120mm, 120 VT. Feeder engine: 4 kW, AC Servo-Drive continuously adjustable, via timing belts, forward drive speed max. 170 m / min., 6 driven half smooth and hard chrome plated under rollers, 6 upholstered with Polyurethane parts, 1, 4 and 5 upper roller individually Polyurethane part, 1, 4 and 5 upper roller individually adjustable. Sawing tacho intervals, pneumatic, duration from 0.2 to 1 sec.
The standard equipment includes:
- Automatic waste separation, supported by blow
- Effective exhaust connections: 2 x 160 mm diameter
- Pneumatic Equipment with 10 liters of storage for equalization of pressure fluctuations
- Baffle wall via noise performance (noise level> 85 dB (A)
- Electrical and electronic equipment in separate standing cabinets
- Safety protection devices such as automatically pull stop for opening top cover screen.
1 conveyor 12 m/230 mm belt transfer, Overall width: 230 mm, width: 200mm, driven by: geared motor 0.75 kW, 380 V, 186 r / min., B5. 1 length stop rail 3.0 m fixed. 1 guide rail 3.0 m. Length Sorting "single sided" when viewed in transport direction, right push. 6 Push out units, 230 mm stroke, pneumatic. 1 mounting rail, 8500 mm. 1 basic equipment incl. Maintenance Unit. 1 length sort control input via MAXI control for 8 draft spots. 1 special feature for linking and separation of two stations defer mechanism
CNC control:
1 CNC control unit: MAXI 4.0, full optimization, 250 fixed lengths, 4 modes, 5 statistics, priorities as desired can be changed corresponding to the number of pieces, quarz clock, self-test program to screen 12 "incision location, V24, according to brochure "Optimization with CNC control", Fig. 8 with feet, without middle and lower cabinet for printer and tools, total height 1850 mm.
1 Operator terminal with a keyboard, screen size 12 ", LED indication, Control Panel: 600x600x400 mm, total height 1850 mm. 1 electrical equipment and control for mechanization
1 Conveyor 12 m/230 mm oblique, split execution, instead offered a 10 m belt

1 increase the working height to 1200 mm
1 Waste conveyor 2.0 m, bandwidth 300 mm, tape speed of approximately 0.4 m / sec. Drive geared motor 0.37 kW, 220/380 V 50 hz., 3 steps. IP 54. Falling funnel and push bars, height adjustable foot supports

Adresse:

Knastvej 3, Oddense, 7860 Spøttrup

Bieten endet:

25-04-2012 13:00:00

Besichtigung:

Viewing on 10. April 2012 from 10 AM to 4 PM CET

Lieferung:

Collection on 3. and 4. May and 7. and 8. May 2012 from 8 AM to 4 PM CET or by prior appointment

Nr.#:

0004A

Auktion:

KJ Auktion 58