KJ Auktion online event # 195: Marsh Wind Technology, Part 2, closing 25. June 2014 from 1 PM CEST
Auction 195
Location:
Building B and C, Mørupvej 27, 7400 Herning, Denmark
By instruction of the administrator KJ Auktion will be selling equipment from the estate Marsh Wind Technology. This is sale 2 of 8 including machine tools and equipment from the assembly and sheet metal shop.
The sale is subject to private treaty (sale by negotiation). If agreed the sold lots will be withdrawn from the auction and previous bids on sold lots will be cancelled.
 |
 |
 |
 |
 |
 |
Viewing:
Viewing on Friday, 20. June 2014 from 10 AM to 4 PM CEST
Pickup:
Thursday 26. June and Friday 27. June from 9 AM to 4 PM CEST
Pallet with tube threading units + lifting chains + vise, etc.
Number: 0201
Address: Bygning C-D, Mørup vej 27, 7400 Herning
2 x spot welding extractor, wall mounted
Number: 0202
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (9), Demag, 1000 kg. + Electric hoist below gantry, Demag, 1000 kg. Hook, 1000 kg. 2-speed all directions + span around. 7 meters
Number: 0203
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (8), Demag, 1000 kg. + Electric hoist below gantry, Demag, 1000 kg. Hook 1000 kg. Span approx. 7 meters
Number: 0205
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Work table, approx. 1000x750 mm + vice + drawer + plate clamps
Number: 0206
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Bending Roll, Webb 6L-54. SN: X497. 3 rolls, length approx. 2500 mm. Attached safety switch
Number: 0207
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead traveling crane (30), 1000 kg. Electric hoist below gantry, Demag, 1000 kg. Hook: 1000 kg. 2 speed up / down. Span approx. 7 meters
Number: 0208
Address: Bygning C-D, Mørup vej 27, 7400 Herning
4 span cantilever racking, 5 branches without content
Number: 0209
Address: Bygning C-D, Mørup vej 27, 7400 Herning
2 x Canalis rails, Schneider Electric KSA 800 ED 45010, 3L + N + PE, unused, 6 outlets + 2 used canalis rails, 5 outlets
Number: 0210
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Hydraulic pallet scissor lift table, max. 1000 kg
Number: 0211
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Terminal unit with content (fire extinguisher not included)
Number: 0215
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (27), electric hoist below gantry, Demag, 1000 kg. 2 speeds. Span approx. 7 meters
Number: 0216
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (48), 2000 kg. Asea. Electric hoist below gantry, Demag, 2000 kg. Hook 2000 kg. 2 speed up / down. Span approx. 7 meters
Number: 0217
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cables + torch. Mounted in a frame on wheels
Number: 0218
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 1000 x 750 x 15 mm + content + stool + grid + welding surface, approx. 2000x800x10 cm + vice + tool panel + content, including clamps, visors, tool box with contents
Number: 0219
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 1200x800x10 cm + tool panel + content, including various drills
Number: 0220
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cables + torch. Mounted in a frame on wheels. Note: sticker with "Faulty power supply")
Number: 0221
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Drill press, Ibarmia B50, SN: 849-E. Attached emergency stop. Drill: 10-50 mm
Number: 0222
Address: Bygning C-D, Mørup vej 27, 7400 Herning
4 x welding rollers, width 500 mm + trolley with monitor, etc.
Number: 0224
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAN 400 with cooling unit + cables. Mounted in a frame on wheels
Number: 0226
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAW 510W + wire feed box, ESAB MEK 20 (NB labeled defective circuit boards) + welding cables. Mounted in a frame on wheels
Number: 0227
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welding rectifier, ESAB THF 630 + safe unit + cables. Mounted in a frame on wheels
Number: 0230
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Bolt Welder, Dabokek DT 400 with welding cable and gun + steel table on wheels
Number: 0232
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Oil barrel with cutting oil + mounted in steel frame
Number: 0234
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Bolt Welder, Nelson Intra 1400 + welding cables. Mounted in a frame on wheels
Number: 0235
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Esab LAW 500 + wire feed box, ESAB MEK 4 + swing arm + welding cable + torch. Tagged OK
Number: 0236
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Bandsaw, Epple Metal Band Saw BS 350 DG + roller conveyors, length approx. 4m + roller trestle
Number: 0237
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Content in cantilever racking: Various steel
Number: 0238
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet Racking, 5 branches. Length approx. 6 meters. Without content
Number: 0239
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp
Number: 0240
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit. Mounted in a frame on wheels. Tagged OK
Number: 0241
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp
Number: 0242
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Content in cantilever racking: Various steel
Number: 0244
Address: Bygning C-D, Mørup vej 27, 7400 Herning
3 span cantilever racking, 5 branches. Length approx. 6 meters
Number: 0245
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 2000x800x10 mm + tool panel + content, including hand tools
Number: 0247
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Metal Belt sander, Erini, 2000x75mm with exhaust, filter barrel and hose on wall mounted swing arm
Number: 0248
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic KDO 500 + wire feed unit (missing covers). Mounted in a frame on wheels
Number: 0249
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding rectifier, ESAB THF 400 + safe box + welding cables. Mounted in a frame on wheels
Number: 0250
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAF 400 + wire feed unit, ESAB A120-MEC30 + welding cables + torch. Mounted in a frame on wheels
Number: 0251
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic KDO 600 + wire feed unit (missing covers, labeled "Defective"). Mounted in a frame on wheels
Number: 0252
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Tool Box, Steel. 4 doors + content in the cabinet, including drills, milling tools, thread cutting tools, tool holders, inserts, reamers, measuring tools
Number: 0253
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (7), 2000 kg, Demag electric hoist below gantry + hook, 2000 kg. Span approx. 7 meters
Number: 0258
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAW 500W. Mounted in a frame on wheels
Number: 0260
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAW 500W. Mounted in a frame on wheels
Number: 0261
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAW 400 mounted in the frame on wheels
Number: 0262
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic KDO 400 + wire feed unit (missing cover). Tagged OK. Mounted in a frame on wheels
Number: 0263
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LTG 250 + pressure gauge + cooling unit. Mounted in a frame on wheels
Number: 0265
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Compressor, RENO VP 20, 16.5 bar, year 2009 + dryer, Midas Pneu Dri + power panel. All fitted on a pallet
Number: 0268
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit (missing cover) + welding cable welding + handle + prssure gauge. Mounted on wheels
Number: 0269
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Anvil on stump, Kolswa, Sweden. Measure from the horn to the back edge, approx. 80 cm. Width approx. 12 cm
Number: 0270
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit (without cover) on wheels + welding cables + torch. Mounted in a frame on wheels
Number: 0271
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Horizontal hydraulic plate bending machine, Euromac PB 650, press force max. 65 tonne plus steel with various bending tools + 2 roller trestles + manuals
Number: 0272
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Local exhaust ventilation, wall mounted
Number: 0273
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Combined iron worker, Peddinghaus, Peddimaster 60/100H SN: 4423051887035 + steel cabinet with tool
Number: 0274
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Work Bench, approx. 1000 x 750 mm + tray + various on workbench, including gas burner handles pressure control oxygen and gas hoses + air cup grinder + welding electrodes
Number: 0277
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Local exhaust ventilation, wall mounted
Number: 0278
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Wheels built with V-shaped bearing. Marked "10 tons"
Number: 0280
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cable + torch + pressure gauge. Mounted in a frame on wheels
Number: 0281
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Plasma cutter, ESAB ESP-150 + welding cables + torch
Number: 0282
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cable + torch. Mounted in a frame on wheels
Number: 0283
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with various welding accessories, such as gas burners, welding wire in roll + toolkit with content + pressure regulators, etc.
Number: 0284
Address: Bygning C-D, Mørup vej 27, 7400 Herning
6 x Euro pallets with pallet collars + 7 x half pallets with pallet collars with content: various assortment boxes, plastic
Number: 0286
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding Rotators, unpowered, ESAB PEMA, type 30 TNS. Max. Load: 150 N. Diameter range: 500-4500 mm. Year 2000
Number: 0289
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with miscellaneous, including Dabotek MR bolts and pallet with oil sump with lifting eyes
Number: 0293
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet including lifting gear + 2 tool boxes, wooden
Number: 0294
Address: Bygning C-D, Mørup vej 27, 7400 Herning
1 span steel rack with content including 2 x hoses + air hose + stool
Number: 0296
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Dynamig 505 + wire feed box, Migatronic KT 140 + welding cables + torch. Mounted in a frame on wheels
Number: 0297
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic KDO 500 + wire feed unit (missing covers). Mounted in a frame on wheels
Number: 0298
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB Aristo ME 500 + wire feed box, ESAB Aristofeed 30-4. Mounted in a frame on wheels
Number: 0300
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp
Number: 0301
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Submerged arc welding machine, ESAB LAF 1250 DC + wire feed box, ESAB A2-A6 + welding cables. Mounted in frame with truck lifting brackets
Number: 0302
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Everything in the room minus fixed installations
Number: 0304
Address: Bygning C-D, Mørup vej 27, 7400 Herning
1 span cantilever racking, separated. 5 branches. Branches to both sides
Number: 0305
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding Manipulator, Walter Gieseking, type SD10. SN: I-1433. Capacity: 12.5 ton. Speed: 0.015 cm / min
Number: 0306
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Submerged Arc Welding Elevating Platform. Max. 3 people. Fitted with ESAB LAE 800 + wire feed unit, ESAB A6
Number: 0307
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 2900x1900x55 mm + various spray bottles
Number: 0308
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding cabinet, Norio ES380. Max. 80 degrees centigrade. : 350 kg. + Ceramic on tape
Number: 0309
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding Manipulator, ESAB Pema-3500 AHM
Number: 0312
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Work Bench with drawer, approx. 1500 x 750 mm
Number: 0314
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Oxygen and acetylene hoses with rewinding and 2 x pressure regulators
Number: 0315
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Work Bench, approx. 1000 x 800 mm + tray
Number: 0317
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Portable Oxy Fuel Cutting Machine, ESAB MiggyTrac, 1001 + wooden box
Number: 0318
Address: Bygning C-D, Mørup vej 27, 7400 Herning
2 pallets with stairs, cable / chain rack + wire mesh cage
Number: 0319
Address: Bygning C-D, Mørup vej 27, 7400 Herning
CO2 welding, ESAB THF 630 + safe box + welding cables + torch. Mounted in a frame on wheels
Number: 0320
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding rectifier, ESAB THF 630 + welding cables + safe. Mounted in a frame on wheels
Number: 0321
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic MIG 520 + wire feed unit (without cover) + welding cable welding + torch + gauge + cooling unit, CTU 3000. Mounted in frame on wheels
Number: 0322
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Plasma cutter, ESAB Powercut 1875 Magnet. Mounted in a frame on wheels
Number: 0323
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic KDO 500 + wire feed unit + welding cables + torch. Mounted in a frame on wheels
Number: 0324
Address: Bygning C-D, Mørup vej 27, 7400 Herning
5 x aluminum leveling rails. Assorted lengths
Number: 0325
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet including Funnels LEV + flexible hoses for suction + flexible hoses
Number: 0326
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 2000 x 800 x 10 mm + tool panel + drawing rack
Number: 0327
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with various parts plasma cutter + vacuum pump, Büsch
Number: 0328
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Belt Sander on wheels for polishing large horizontal surfaces. HM JAS 75 75x2000 mm
Number: 0329
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with various steel wire rope, etc.
Number: 0331
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier mounted on a trolley
Number: 0332
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with drinking water dispenser + steel tool cabinet + steel box with hand tools
Number: 0336
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Steel stand with parts of pallet racking, etc.
Number: 0337
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (4087), electric hoist below gantry, Demag, 5,000 kg. Area, 5,000 kg. 2-speed all directions. Span approx. 14 meters
Number: 0338
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead crane dismantled (No. 17). 32300 kg. Demag electric hoist below the gantry. Hook: Demag 3200 kg. Span approx. 14 meters
Number: 0339
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Gantry crane, 5,000 kg. Double bridge. Electric hoist on gantry. Demag hoist, 5 ton. Hook, Demag, 5 ton. 2 speed up / down. Span approx. 14 meters
Number: 0340
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with various shackles + 3 x steel wire levers
Number: 0342
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with 5 x aluminium stepladders, 3 steps, Zarges
Number: 0343
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with 6 x aluminium ladders, 5 steps, checker plate + Aluminium step landing on wheels. 4 Steps with landing. Height of landing: approx. 1 meter. Railing. Zarges Z600
Number: 0344
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with 5 x wooden boxes + toolkit + steel trolley
Number: 0345
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 2000 x 850 x 10 mm + vice + tool panel with content
Number: 0347
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Belt Sander with extraction, Erini, 75x2000 + filter barrel with hoses + extra sanding belt
Number: 0348
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 2000 x 850 x 10 mm + tool panel
Number: 0349
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cables + torch. Mounted in a frame on wheels
Number: 0350
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cables + torch. Mounted in a frame on wheels
Number: 0351
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Oxygen and acetylene hoses with rewinding + pressure regulators
Number: 0352
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB PowerMíg LAW 520W + wire feed unit on wheels + welding cables
Number: 0353
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cable + torch. Mounted in a frame on wheels
Number: 0354
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp + safe box
Number: 0355
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding bench on wheels, approx. 500 x 800 x 30 mm + welding bench, approx. 7 50 x 500 x 15 mm + lift rope + welding curtains + 1 span steel rack with content including flap discs
Number: 0356
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding cabinet containing various electrodes
Number: 0357
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding cabinet containing various electrodes
Number: 0358
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding cabinet, Norio, type ES210. 1000 watts. Max. 300 degrees. Max. 210 kg
Number: 0359
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp + safe
Number: 0360
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB THF 400 + safe, Hede Nielsen type SE 111 + welding cable
Number: 0361
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Leak finder, Alcatel ASM 120 h + hydraulic nut tighteners, PLARAD, type HSX 555F, year 2008, torque max. 5550 N + lever hoist, 1.5 ton
Number: 0363
Address: Bygning C-D, Mørup vej 27, 7400 Herning
1 span steel shelving + pallet racking, dismantled, 4 uprights, height approx. 2 m + 4 load beams, approx. 1.7 meters, 2 x 350 kg + 4 load beams, approx. 1.8 m
Number: 0364
Address: Bygning C-D, Mørup vej 27, 7400 Herning
TIG Welding rectifier, ESAB LTG 250 + tig welding handle + welding cable. Mounted in a frame on wheels
Number: 0365
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Submerged Arc Welder, ESAB LAE 800 with welding tractor + welding cables + wire feed box, ESAB A2. Mounted in a frame on wheels
Number: 0366
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp + safe, Hede Nielsen, Type 111
Number: 0367
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 H1 N2 = 0.62
Number: 0368
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 H1 N2 = 0.62
Number: 0369
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 H1 N2 = 0.62
Number: 0370
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 H1 N2 = 0.62
Number: 0371
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 M1 N2 = 0.6
Number: 0372
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 M1 N2 = 0.6
Number: 0373
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Compressed air hose on a pallet + compressed air hose on reel
Number: 0374
Address: Bygning C-D, Mørup vej 27, 7400 Herning
3 boxes of filters, unused, labeled F5 592x892x500 Z6
Number: 0377
Address: Bygning C-D, Mørup vej 27, 7400 Herning
5 boxes of filters, unused, labeled F5 592x892x500 Z6
Number: 0378
Address: Bygning C-D, Mørup vej 27, 7400 Herning
4 boxes of filters, unused, labeled F5 592x892x500 Z6
Number: 0379
Address: Bygning C-D, Mørup vej 27, 7400 Herning
7 boxes of filters, unused, labeled F5 592x892x500 Z6
Number: 0380
Address: Bygning C-D, Mørup vej 27, 7400 Herning
3 boxes of filters, unused, labeled F5 592x592x500 Z6
Number: 0381
Address: Bygning C-D, Mørup vej 27, 7400 Herning
6 boxes of filters of approx. 11 pcs, unused, labeled F5 592x592x500 Z6
Number: 0382
Address: Bygning C-D, Mørup vej 27, 7400 Herning
6 boxes of filters of approx. 11 pcs, unused, labeled F5 592x592x500 Z6
Number: 0383
Address: Bygning C-D, Mørup vej 27, 7400 Herning
6 boxes of filters of approx. 11 pcs, unused, labeled F5 592x592x500 Z6
Number: 0384
Address: Bygning C-D, Mørup vej 27, 7400 Herning
5 boxes of filters of approx. 11 pcs, unused, labeled F5 592x592x500 Z6
Number: 0385
Address: Bygning C-D, Mørup vej 27, 7400 Herning
7 boxes of filters of approx. 11 pcs, unused, labeled F5 592x592x500 Z6
Number: 0386
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (55), 5,000 kg. Demag electric hoist on gantry. Hook: 5,000 kg. 2 speed up / down. Span approx. 14 meters
Number: 0390
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (4), 5,000 kg. Demag electric hoist on gantry. Hook: 5,000 kg. 2 speed up / down. Span approx. 14 meters
Number: 0391
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (5), 5,000 kg. Demag electric hoist to gantry. Hook: 5,000 kg. 2 speed up / down. Span approx. 14 meters
Number: 0392
Address: Bygning C-D, Mørup vej 27, 7400 Herning
10 x soundproof partitions, 0.5 x 1250. 200 mm insulation. Length approx. 5 meters. Sandwich Panel SPA100L
Number: 0393
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Trolley with assortment rack + content
Number: 0394
Address: Bygning C-D, Mørup vej 27, 7400 Herning
Part of gate hoist, Mega Door, Assa Abloy, length approx. 7 meters
Number: 0395
Address: Bygning C-D, Mørup vej 27, 7400 Herning
