KJ Auktion online event # 195: Marsh Wind Technology, Part 2, closing 25. June 2014 from 1 PM CEST
Auktion 195
Adresse:
Building B and C, Mørupvej 27, 7400 Herning, Denmark
By instruction of the administrator KJ Auktion will be selling equipment from the estate Marsh Wind Technology. This is sale 2 of 8 including machine tools and equipment from the assembly and sheet metal shop.
The sale is subject to private treaty (sale by negotiation). If agreed the sold lots will be withdrawn from the auction and previous bids on sold lots will be cancelled.
 |
 |
 |
 |
 |
 |
Besichtigung:
Viewing on Friday, 20. June 2014 from 10 AM to 4 PM CEST
Pickup:
Thursday 26. June and Friday 27. June from 9 AM to 4 PM CEST
Pallet with tube threading units + lifting chains + vise, etc.
Nummer: 0201
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
2 x spot welding extractor, wall mounted
Nummer: 0202
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (9), Demag, 1000 kg. + Electric hoist below gantry, Demag, 1000 kg. Hook, 1000 kg. 2-speed all directions + span around. 7 meters
Nummer: 0203
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (8), Demag, 1000 kg. + Electric hoist below gantry, Demag, 1000 kg. Hook 1000 kg. Span approx. 7 meters
Nummer: 0205
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Work table, approx. 1000x750 mm + vice + drawer + plate clamps
Nummer: 0206
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Bending Roll, Webb 6L-54. SN: X497. 3 rolls, length approx. 2500 mm. Attached safety switch
Nummer: 0207
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead traveling crane (30), 1000 kg. Electric hoist below gantry, Demag, 1000 kg. Hook: 1000 kg. 2 speed up / down. Span approx. 7 meters
Nummer: 0208
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
4 span cantilever racking, 5 branches without content
Nummer: 0209
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
2 x Canalis rails, Schneider Electric KSA 800 ED 45010, 3L + N + PE, unused, 6 outlets + 2 used canalis rails, 5 outlets
Nummer: 0210
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Hydraulic pallet scissor lift table, max. 1000 kg
Nummer: 0211
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Terminal unit with content (fire extinguisher not included)
Nummer: 0215
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (27), electric hoist below gantry, Demag, 1000 kg. 2 speeds. Span approx. 7 meters
Nummer: 0216
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (48), 2000 kg. Asea. Electric hoist below gantry, Demag, 2000 kg. Hook 2000 kg. 2 speed up / down. Span approx. 7 meters
Nummer: 0217
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cables + torch. Mounted in a frame on wheels
Nummer: 0218
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 1000 x 750 x 15 mm + content + stool + grid + welding surface, approx. 2000x800x10 cm + vice + tool panel + content, including clamps, visors, tool box with contents
Nummer: 0219
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 1200x800x10 cm + tool panel + content, including various drills
Nummer: 0220
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cables + torch. Mounted in a frame on wheels. Note: sticker with "Faulty power supply")
Nummer: 0221
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Drill press, Ibarmia B50, SN: 849-E. Attached emergency stop. Drill: 10-50 mm
Nummer: 0222
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
4 x welding rollers, width 500 mm + trolley with monitor, etc.
Nummer: 0224
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAN 400 with cooling unit + cables. Mounted in a frame on wheels
Nummer: 0226
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAW 510W + wire feed box, ESAB MEK 20 (NB labeled defective circuit boards) + welding cables. Mounted in a frame on wheels
Nummer: 0227
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welding rectifier, ESAB THF 630 + safe unit + cables. Mounted in a frame on wheels
Nummer: 0230
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Bolt Welder, Dabokek DT 400 with welding cable and gun + steel table on wheels
Nummer: 0232
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Oil barrel with cutting oil + mounted in steel frame
Nummer: 0234
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Bolt Welder, Nelson Intra 1400 + welding cables. Mounted in a frame on wheels
Nummer: 0235
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Esab LAW 500 + wire feed box, ESAB MEK 4 + swing arm + welding cable + torch. Tagged OK
Nummer: 0236
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Bandsaw, Epple Metal Band Saw BS 350 DG + roller conveyors, length approx. 4m + roller trestle
Nummer: 0237
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Content in cantilever racking: Various steel
Nummer: 0238
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet Racking, 5 branches. Length approx. 6 meters. Without content
Nummer: 0239
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp
Nummer: 0240
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit. Mounted in a frame on wheels. Tagged OK
Nummer: 0241
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp
Nummer: 0242
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Content in cantilever racking: Various steel
Nummer: 0244
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
3 span cantilever racking, 5 branches. Length approx. 6 meters
Nummer: 0245
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 2000x800x10 mm + tool panel + content, including hand tools
Nummer: 0247
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Metal Belt sander, Erini, 2000x75mm with exhaust, filter barrel and hose on wall mounted swing arm
Nummer: 0248
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic KDO 500 + wire feed unit (missing covers). Mounted in a frame on wheels
Nummer: 0249
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding rectifier, ESAB THF 400 + safe box + welding cables. Mounted in a frame on wheels
Nummer: 0250
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAF 400 + wire feed unit, ESAB A120-MEC30 + welding cables + torch. Mounted in a frame on wheels
Nummer: 0251
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic KDO 600 + wire feed unit (missing covers, labeled "Defective"). Mounted in a frame on wheels
Nummer: 0252
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Tool Box, Steel. 4 doors + content in the cabinet, including drills, milling tools, thread cutting tools, tool holders, inserts, reamers, measuring tools
Nummer: 0253
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (7), 2000 kg, Demag electric hoist below gantry + hook, 2000 kg. Span approx. 7 meters
Nummer: 0258
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAW 500W. Mounted in a frame on wheels
Nummer: 0260
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAW 500W. Mounted in a frame on wheels
Nummer: 0261
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LAW 400 mounted in the frame on wheels
Nummer: 0262
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic KDO 400 + wire feed unit (missing cover). Tagged OK. Mounted in a frame on wheels
Nummer: 0263
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB LTG 250 + pressure gauge + cooling unit. Mounted in a frame on wheels
Nummer: 0265
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Compressor, RENO VP 20, 16.5 bar, year 2009 + dryer, Midas Pneu Dri + power panel. All fitted on a pallet
Nummer: 0268
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit (missing cover) + welding cable welding + handle + prssure gauge. Mounted on wheels
Nummer: 0269
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Anvil on stump, Kolswa, Sweden. Measure from the horn to the back edge, approx. 80 cm. Width approx. 12 cm
Nummer: 0270
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit (without cover) on wheels + welding cables + torch. Mounted in a frame on wheels
Nummer: 0271
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Horizontal hydraulic plate bending machine, Euromac PB 650, press force max. 65 tonne plus steel with various bending tools + 2 roller trestles + manuals
Nummer: 0272
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Local exhaust ventilation, wall mounted
Nummer: 0273
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Combined iron worker, Peddinghaus, Peddimaster 60/100H SN: 4423051887035 + steel cabinet with tool
Nummer: 0274
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Work Bench, approx. 1000 x 750 mm + tray + various on workbench, including gas burner handles pressure control oxygen and gas hoses + air cup grinder + welding electrodes
Nummer: 0277
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Local exhaust ventilation, wall mounted
Nummer: 0278
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Wheels built with V-shaped bearing. Marked "10 tons"
Nummer: 0280
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cable + torch + pressure gauge. Mounted in a frame on wheels
Nummer: 0281
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Plasma cutter, ESAB ESP-150 + welding cables + torch
Nummer: 0282
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cable + torch. Mounted in a frame on wheels
Nummer: 0283
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with various welding accessories, such as gas burners, welding wire in roll + toolkit with content + pressure regulators, etc.
Nummer: 0284
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
6 x Euro pallets with pallet collars + 7 x half pallets with pallet collars with content: various assortment boxes, plastic
Nummer: 0286
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding Rotators, unpowered, ESAB PEMA, type 30 TNS. Max. Load: 150 N. Diameter range: 500-4500 mm. Year 2000
Nummer: 0289
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with miscellaneous, including Dabotek MR bolts and pallet with oil sump with lifting eyes
Nummer: 0293
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet including lifting gear + 2 tool boxes, wooden
Nummer: 0294
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
1 span steel rack with content including 2 x hoses + air hose + stool
Nummer: 0296
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Dynamig 505 + wire feed box, Migatronic KT 140 + welding cables + torch. Mounted in a frame on wheels
Nummer: 0297
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic KDO 500 + wire feed unit (missing covers). Mounted in a frame on wheels
Nummer: 0298
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB Aristo ME 500 + wire feed box, ESAB Aristofeed 30-4. Mounted in a frame on wheels
Nummer: 0300
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp
Nummer: 0301
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Submerged arc welding machine, ESAB LAF 1250 DC + wire feed box, ESAB A2-A6 + welding cables. Mounted in frame with truck lifting brackets
Nummer: 0302
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Everything in the room minus fixed installations
Nummer: 0304
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
1 span cantilever racking, separated. 5 branches. Branches to both sides
Nummer: 0305
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding Manipulator, Walter Gieseking, type SD10. SN: I-1433. Capacity: 12.5 ton. Speed: 0.015 cm / min
Nummer: 0306
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Submerged Arc Welding Elevating Platform. Max. 3 people. Fitted with ESAB LAE 800 + wire feed unit, ESAB A6
Nummer: 0307
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 2900x1900x55 mm + various spray bottles
Nummer: 0308
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding cabinet, Norio ES380. Max. 80 degrees centigrade. : 350 kg. + Ceramic on tape
Nummer: 0309
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding Manipulator, ESAB Pema-3500 AHM
Nummer: 0312
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Work Bench with drawer, approx. 1500 x 750 mm
Nummer: 0314
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Oxygen and acetylene hoses with rewinding and 2 x pressure regulators
Nummer: 0315
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Work Bench, approx. 1000 x 800 mm + tray
Nummer: 0317
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Portable Oxy Fuel Cutting Machine, ESAB MiggyTrac, 1001 + wooden box
Nummer: 0318
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
2 pallets with stairs, cable / chain rack + wire mesh cage
Nummer: 0319
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
CO2 welding, ESAB THF 630 + safe box + welding cables + torch. Mounted in a frame on wheels
Nummer: 0320
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding rectifier, ESAB THF 630 + welding cables + safe. Mounted in a frame on wheels
Nummer: 0321
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic MIG 520 + wire feed unit (without cover) + welding cable welding + torch + gauge + cooling unit, CTU 3000. Mounted in frame on wheels
Nummer: 0322
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Plasma cutter, ESAB Powercut 1875 Magnet. Mounted in a frame on wheels
Nummer: 0323
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic KDO 500 + wire feed unit + welding cables + torch. Mounted in a frame on wheels
Nummer: 0324
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
5 x aluminum leveling rails. Assorted lengths
Nummer: 0325
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet including Funnels LEV + flexible hoses for suction + flexible hoses
Nummer: 0326
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 2000 x 800 x 10 mm + tool panel + drawing rack
Nummer: 0327
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with various parts plasma cutter + vacuum pump, Büsch
Nummer: 0328
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Belt Sander on wheels for polishing large horizontal surfaces. HM JAS 75 75x2000 mm
Nummer: 0329
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with various steel wire rope, etc.
Nummer: 0331
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier mounted on a trolley
Nummer: 0332
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with drinking water dispenser + steel tool cabinet + steel box with hand tools
Nummer: 0336
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Steel stand with parts of pallet racking, etc.
Nummer: 0337
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (4087), electric hoist below gantry, Demag, 5,000 kg. Area, 5,000 kg. 2-speed all directions. Span approx. 14 meters
Nummer: 0338
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead crane dismantled (No. 17). 32300 kg. Demag electric hoist below the gantry. Hook: Demag 3200 kg. Span approx. 14 meters
Nummer: 0339
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Gantry crane, 5,000 kg. Double bridge. Electric hoist on gantry. Demag hoist, 5 ton. Hook, Demag, 5 ton. 2 speed up / down. Span approx. 14 meters
Nummer: 0340
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with various shackles + 3 x steel wire levers
Nummer: 0342
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with 5 x aluminium stepladders, 3 steps, Zarges
Nummer: 0343
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with 6 x aluminium ladders, 5 steps, checker plate + Aluminium step landing on wheels. 4 Steps with landing. Height of landing: approx. 1 meter. Railing. Zarges Z600
Nummer: 0344
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Pallet with 5 x wooden boxes + toolkit + steel trolley
Nummer: 0345
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 2000 x 850 x 10 mm + vice + tool panel with content
Nummer: 0347
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Belt Sander with extraction, Erini, 75x2000 + filter barrel with hoses + extra sanding belt
Nummer: 0348
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding surface, approx. 2000 x 850 x 10 mm + tool panel
Nummer: 0349
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cables + torch. Mounted in a frame on wheels
Nummer: 0350
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cables + torch. Mounted in a frame on wheels
Nummer: 0351
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Oxygen and acetylene hoses with rewinding + pressure regulators
Nummer: 0352
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB PowerMíg LAW 520W + wire feed unit on wheels + welding cables
Nummer: 0353
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, Migatronic Sigma 500 + wire feed unit + welding cable + torch. Mounted in a frame on wheels
Nummer: 0354
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp + safe box
Nummer: 0355
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding bench on wheels, approx. 500 x 800 x 30 mm + welding bench, approx. 7 50 x 500 x 15 mm + lift rope + welding curtains + 1 span steel rack with content including flap discs
Nummer: 0356
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding cabinet containing various electrodes
Nummer: 0357
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding cabinet containing various electrodes
Nummer: 0358
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Electrode welding cabinet, Norio, type ES210. 1000 watts. Max. 300 degrees. Max. 210 kg
Nummer: 0359
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp + safe
Nummer: 0360
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Welding rectifier, ESAB THF 400 + safe, Hede Nielsen type SE 111 + welding cable
Nummer: 0361
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Leak finder, Alcatel ASM 120 h + hydraulic nut tighteners, PLARAD, type HSX 555F, year 2008, torque max. 5550 N + lever hoist, 1.5 ton
Nummer: 0363
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
1 span steel shelving + pallet racking, dismantled, 4 uprights, height approx. 2 m + 4 load beams, approx. 1.7 meters, 2 x 350 kg + 4 load beams, approx. 1.8 m
Nummer: 0364
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
TIG Welding rectifier, ESAB LTG 250 + tig welding handle + welding cable. Mounted in a frame on wheels
Nummer: 0365
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Submerged Arc Welder, ESAB LAE 800 with welding tractor + welding cables + wire feed box, ESAB A2. Mounted in a frame on wheels
Nummer: 0366
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Stick welder, ESAB (eggshell), 500 Amp + safe, Hede Nielsen, Type 111
Nummer: 0367
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 H1 N2 = 0.62
Nummer: 0368
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 H1 N2 = 0.62
Nummer: 0369
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 H1 N2 = 0.62
Nummer: 0370
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 H1 N2 = 0.62
Nummer: 0371
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 M1 N2 = 0.6
Nummer: 0372
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Gear unit for welding rollers, Getriebebau Nord, type SK 9062.1/32AZD-80 L / 4 Bre 10 TF. L = 2221.4 M1 N2 = 0.6
Nummer: 0373
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Compressed air hose on a pallet + compressed air hose on reel
Nummer: 0374
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
3 boxes of filters, unused, labeled F5 592x892x500 Z6
Nummer: 0377
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
5 boxes of filters, unused, labeled F5 592x892x500 Z6
Nummer: 0378
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
4 boxes of filters, unused, labeled F5 592x892x500 Z6
Nummer: 0379
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
7 boxes of filters, unused, labeled F5 592x892x500 Z6
Nummer: 0380
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
3 boxes of filters, unused, labeled F5 592x592x500 Z6
Nummer: 0381
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
6 boxes of filters of approx. 11 pcs, unused, labeled F5 592x592x500 Z6
Nummer: 0382
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
6 boxes of filters of approx. 11 pcs, unused, labeled F5 592x592x500 Z6
Nummer: 0383
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
6 boxes of filters of approx. 11 pcs, unused, labeled F5 592x592x500 Z6
Nummer: 0384
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
5 boxes of filters of approx. 11 pcs, unused, labeled F5 592x592x500 Z6
Nummer: 0385
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
7 boxes of filters of approx. 11 pcs, unused, labeled F5 592x592x500 Z6
Nummer: 0386
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (55), 5,000 kg. Demag electric hoist on gantry. Hook: 5,000 kg. 2 speed up / down. Span approx. 14 meters
Nummer: 0390
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (4), 5,000 kg. Demag electric hoist on gantry. Hook: 5,000 kg. 2 speed up / down. Span approx. 14 meters
Nummer: 0391
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Overhead Crane (5), 5,000 kg. Demag electric hoist to gantry. Hook: 5,000 kg. 2 speed up / down. Span approx. 14 meters
Nummer: 0392
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
10 x soundproof partitions, 0.5 x 1250. 200 mm insulation. Length approx. 5 meters. Sandwich Panel SPA100L
Nummer: 0393
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Trolley with assortment rack + content
Nummer: 0394
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
Part of gate hoist, Mega Door, Assa Abloy, length approx. 7 meters
Nummer: 0395
Adresse: Bygning C-D, Mørup vej 27, 7400 Herning
